Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X25
The AirTAC B06-SC Battery-Dedicated Standard Cylinder B06-SC40X25 is a genuine double-acting standard air cylinder with a Ø40mm bore and 25mm stroke, PT1/4 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ40 mm
- Stroke25 mm
- Port sizePT1/4
- Acting typeDouble acting
- Rod threadM12×1.25
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X25
The B06-SC40X25 is a double-acting tie-rod air cylinder built for battery manufacturing lines. The B06- prefix marks it as AirTAC's battery-dedicated variant of the standard SC40X25, meaning it shares the exact same 40mm bore, 25mm stroke, and 628N push force at 0.5 MPa.
Featuring a 16mm piston rod and a compact body length A of 142mm, this cylinder provides 1130N of thrust at 0.9 MPa. It uses standard PT1/4 ports and adjustable cushions to ensure smooth end-of-stroke deceleration for high-speed assembly tasks.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X25 Technical Specifications
| Model | Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X25 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø40 mm |
| Stroke | 25 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (approx.) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X25
| SC | Standard tie-rod cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X25 Is Used
Cell Tabbing & Welding
Provides the precise 628N clamping force at 0.5 MPa needed to hold battery cells securely during ultrasonic tab welding.
Module Handling Stopper
Acts as a compact 25mm stroke stopper on conveyor lines to index battery modules into position for robotic pickup.
Pack Alignment Pusher
Delivers 879N push force at 0.7 MPa to square up and align battery packs within their aluminum housings before final fastening.
Is the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X25 the Right Cylinder?
This 40mm bore cylinder provides 628N push force at 0.5 MPa. If your battery handling module needs less force, step down to the 32mm bore (402N at 0.5 MPa); for heavier pack manipulation, step up to the 50mm bore (982N at 0.5 MPa). With a short 25mm stroke, side-load stress on the rod bearing is minimal, making it ideal for compact tabbing or clamping stations.
When replacing this unit, match these five attributes exactly: 40mm bore, 25mm stroke, PT1/4 port thread, basic mounting (no bracket), and no magnet. It is a genuine AirTAC tie-rod cylinder, shorter than an ISO 15552 profile, so it is not dimensionally interchangeable with ISO cylinders.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X25 FAQ
The B06- prefix designates this as an AirTAC cylinder dedicated to battery manufacturing applications. Mechanically, it is identical to the standard SC40X25, offering the same 40mm bore, 25mm stroke, and 1130N thrust at 0.9 MPa.
No, this is a double-acting cylinder and cannot hold a load or position without live air pressure. The adjustable cushion only decelerates the piston at stroke end; a mechanical lock or external brake is required to hold a load safely.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X25
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.