Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X250
The AirTAC B06-SC Battery-Dedicated Standard Cylinder B06-SC40X250 is a genuine double-acting standard air cylinder with a Ø40mm bore and 250mm stroke, PT1/4 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ40 mm
- Stroke250 mm
- Port sizePT1/4
- Acting typeDouble acting
- Rod threadM12×1.25
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X250
The B06-SC40X250 is an AirTAC double-acting tie-rod pneumatic cylinder. The B06- prefix designates it as a battery-manufacturing dedicated variant, mechanically identical to the standard SC40X250. It delivers 628N of push force at 0.5 MPa and features a 16mm piston rod with a 142mm body length A.
With a 250mm stroke, this unit provides an extended length of approximately 392mm. It includes adjustable cushions measuring 21mm to decelerate the piston at stroke ends, making it well-suited for the precise handling tasks found in cell and module assembly lines.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X250 Technical Specifications
| Model | Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X250 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø40 mm |
| Stroke | 250 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (approx.) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X250
| SC | Standard tie-rod cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×250 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X250 Is Used
Cell Stacking
Provides the 628N push force at 0.5 MPa needed to align and press prismatic battery cells into stable modules.
Module Handling
Extends 250mm to push battery modules onto conveyor lines or transfer stations between assembly steps.
Tab Welding Clamp
Holds busbars and cell tabs firmly in position for laser welding, relying on 879N of thrust at 0.7 MPa.
Is the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X250 the Right Cylinder?
This 40mm bore generates 628N push and 528N pull at 0.5 MPa. If your battery stacking or handling equipment requires less force, stepping down to a 32mm bore yields 402N push. If you need higher clamping power for pack assembly, a 50mm bore provides 982N push at 0.5 MPa.
Because this model has a 250mm stroke, the unsupported 16mm rod is susceptible to bending under side loads. Use an external guide rail or a guided cylinder to prevent rod-bearing damage. For exact replacements, match the 40mm bore, 250mm stroke, PT1/4 port thread, basic mounting, and non-magnet configuration.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X250 FAQ
The B06- prefix indicates this is a battery-manufacturing dedicated cylinder. It is mechanically identical to the standard SC40X250, offering the same 40mm bore, 250mm stroke, PT1/4 port, and TPU seals.
No, this is a double-acting air cylinder and does not lock or hold a load without live pressure. The 21mm adjustable cushion only decelerates the piston near the end of the stroke to reduce impact. A mechanical lock or external brake is required for position holding.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X250
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.