Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X25S
The AirTAC B06-SC Battery-Dedicated Standard Cylinder B06-SC40X25S is a genuine double-acting standard air cylinder with a Ø40mm bore and 25mm stroke, PT1/4 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ40 mm
- Stroke25 mm
- Port sizePT1/4
- Acting typeDouble acting
- Rod threadM12×1.25
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X25S
The B06-SC40X25S is a battery-manufacturing dedicated variant of the standard AirTAC SC40X25S single-rod, double-acting tie-rod cylinder. The B06- prefix designates its use on battery cell, module, and pack assembly lines, but mechanically it shares the exact same physical specifications as the base model. It features a 40mm bore and a compact 25mm stroke.
This model delivers 628N of push force at 0.5 MPa and 1130N at 0.9 MPa. The S suffix indicates a built-in magnet, allowing CMSG, DMSG, or EMSG sensors to clamp directly onto the cylinder barrel for position detection. It uses a 16mm piston rod, a PT1/4 port, and has a body length A of 142mm.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X25S Technical Specifications
| Model | Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X25S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø40 mm |
| Stroke | 25 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (approx.) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X25S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X25S Is Used
Cell Stacking Press
Provides precise 25mm short-stroke pressing and alignment for prismatic battery cells during the stacking process.
Tab Welding Clamp
Delivers 879N of force at 0.7 MPa to hold battery tabs firmly in place during ultrasonic or laser welding operations.
Module Handling Stopper
Acts as a compact stopper or positioning gate on conveyor lines moving battery modules between assembly stations.
Is the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X25S the Right Cylinder?
Select this 40mm bore cylinder when an application requires roughly 628N of push force at 0.5 MPa. If your battery handling line needs less force, stepping down to a 32mm bore yields 402N; if more clamping power is needed, a 50mm bore provides 982N. The 25mm stroke is ideal for short, rapid movements.
When replacing this unit, match the 40mm bore, 25mm stroke, PT1/4 port thread, basic mounting style, and the built-in magnet (-S). Because this is a tie-rod cylinder, it is shorter than an ISO 15552 profile cylinder and is not dimensionally interchangeable with that standard.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X25S FAQ
The B06- prefix indicates this is a battery-manufacturing dedicated variant of the AirTAC SC40X25S. It is mechanically identical to the standard SC40X25S, featuring the same 40mm bore, 25mm stroke, 1130N force at 0.9 MPa, and built-in magnet, but is designated for battery industry applications.
No, the SC series is double-acting and cannot hold a load or position without live air pressure. The adjustable cushion only decelerates the piston at stroke end to reduce impact; a mechanical lock or external brake is required to hold a load safely.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X25S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.