Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X350
The AirTAC B06-SC Battery-Dedicated Standard Cylinder B06-SC40X350 is a genuine double-acting standard air cylinder with a Ø40mm bore and 350mm stroke, PT1/4 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ40 mm
- Stroke350 mm
- Port sizePT1/4
- Acting typeDouble acting
- Rod threadM12×1.25
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X350
The B06-SC40X350 is an AirTAC double-acting tie-rod pneumatic cylinder engineered for battery manufacturing environments. The B06- prefix designates this as a battery-manufacturing dedicated variant of the standard SC40X350, meaning it is mechanically identical to the base model. It delivers 628 N of push force at 0.5 MPa and features a 16 mm piston rod with a PT1/4 port.
With a 350 mm stroke and a body length A of 142 mm, the total extended length reaches 492 mm. The cylinder incorporates adjustable cushions measuring 21 mm to decelerate the piston at stroke ends, softening impact without locking the position. This makes it well-suited for the precise handling and assembly tasks required in cell and module production lines.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X350 Technical Specifications
| Model | Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X350 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø40 mm |
| Stroke | 350 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (approx.) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X350
| SC | Standard tie-rod cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×350 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X350 Is Used
Cell Stacking
Provides the 628 N push force at 0.5 MPa needed to align and press prismatic battery cells into modules during automated stacking operations.
Module Handling
Moves battery modules along assembly lines with a 350 mm stroke, utilizing adjustable 21 mm cushions to ensure gentle deceleration of sensitive packs.
Tab Welding Press
Applies consistent clamping pressure for busbar and cell tab welding fixtures, relying on double-acting air control for rapid cycling.
Is the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X350 the Right Cylinder?
This 40 mm bore generates 628 N push and 528 N pull at 0.5 MPa. If your battery stacking or handling process requires less force, stepping down to the 32 mm bore yields 402 N push. Conversely, heavier pack manipulation might need the 50 mm bore, which provides 982 N push at 0.5 MPa.
Because this model has a 350 mm stroke, the 16 mm rod is subject to bending under side loads. For battery line applications involving offset loads or vertical lifting, use an external guide rail or a guided cylinder to prevent rod bearing wear. When sourcing a replacement, match the 40 mm bore, 350 mm stroke, PT1/4 port thread, basic mounting style, and non-magnet configuration exactly.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X350 FAQ
The B06- prefix indicates this is a battery-manufacturing dedicated cylinder. It is mechanically identical to the standard AirTAC SC40X350, offering the same 40 mm bore, 350 mm stroke, and 879 N push force at 0.7 MPa, without any changes to physical specifications.
No, this is a double-acting cylinder and does not lock or hold position without live air pressure. The adjustable cushion only decelerates the piston near the stroke end. For vertical battery module lifting, an external mechanical lock or pilot-operated check valve is required to prevent drifting.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X350
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.