Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X600
The AirTAC B06-SC Battery-Dedicated Standard Cylinder B06-SC40X600 is a genuine double-acting standard air cylinder with a Ø40mm bore and 600mm stroke, PT1/4 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ40 mm
- Stroke600 mm
- Port sizePT1/4
- Acting typeDouble acting
- Rod threadM12×1.25
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X600
The B06-SC40X600 is an AirTAC battery-manufacturing dedicated pneumatic cylinder, mechanically identical to the standard SC40X600. The B06- prefix simply designates its optimized application scenario for cell, module, and pack assembly lines without altering any physical specifications.
This double-acting tie-rod cylinder delivers 879 N of push force at 0.7 MPa and features a 16 mm piston rod. With a 600 mm stroke, it provides extended travel for battery handling tasks. It uses standard TPU seals rated for -20 to +70 C and includes adjustable cushions measuring 21 mm to decelerate the piston at stroke ends.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X600 Technical Specifications
| Model | Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X600 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø40 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (approx.) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X600
| SC | Standard tie-rod cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X600 Is Used
Battery Cell Stacking
Drives the extended linear movement required for aligning and stacking battery cells precisely during module assembly.
Pack Handling
Transfers battery packs along the production line over a 600 mm reach, using 879 N of thrust at 0.7 MPa to push carriers.
Tab Welding Positioning
Extends and retracts to position battery tabs accurately under welding heads, benefiting from adjustable end cushions.
Is the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X600 the Right Cylinder?
This 40 mm bore cylinder offers 628 N push force at 0.5 MPa. If your battery stacking or handling process requires less force, the 32 mm bore provides 402 N at 0.5 MPa. For heavier pack manipulation, stepping up to the 50 mm bore yields 982 N at 0.5 MPa.
Because this model has a 600 mm stroke, the 16 mm rod is susceptible to bending under side loads. Use an external guide rail or a guided cylinder to prevent rod-bearing damage. When replacing this unit, match the 40 mm bore, 600 mm stroke, PT1/4 port thread, basic mounting, and non-magnet configuration exactly.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X600 FAQ
The B06- prefix indicates this is an AirTAC battery-manufacturing dedicated variant of the SC40X600. It is mechanically identical to the standard SC40X600, offering the same 879 N push force at 0.7 MPa, 600 mm stroke, and PT1/4 port, but is designated for battery production line applications.
No, this is a double-acting air cylinder and does not hold position or lock loads when air pressure is lost or exhausted. The adjustable cushion only decelerates the piston near the stroke ends. If your battery assembly process requires position holding without live pressure, you must use an external mechanical lock or pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X600
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.