Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X700S
The AirTAC B06-SC Battery-Dedicated Standard Cylinder B06-SC40X700S is a genuine double-acting standard air cylinder with a Ø40mm bore and 700mm stroke, PT1/4 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ40 mm
- Stroke700 mm
- Port sizePT1/4
- Acting typeDouble acting
- Rod threadM12×1.25
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X700S
The B06-SC40X700S is an AirTAC double-acting tie-rod pneumatic cylinder engineered for battery manufacturing environments. The B06- prefix designates this as a battery-manufacturing dedicated variant of the standard SC40X700S, meaning it is mechanically identical to the base model but tailored for cell, module, and pack assembly lines. It delivers a push force of 628 N at 0.5 MPa and features a 16 mm piston rod.
Equipped with a built-in magnet (indicated by the S suffix), this unit allows CMSG, DMSG, or EMSG sensors to mount directly on the barrel for precise position detection. With a 700 mm stroke and a body length A of 142 mm, the total extended length reaches 842 mm. The adjustable cushion length is 21 mm, ensuring smooth deceleration at stroke ends.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X700S Technical Specifications
| Model | Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X700S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø40 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (approx.) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X700S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X700S Is Used
Battery Cell Stacking
Drives the precise linear indexing required for layering battery cells during stacking operations, utilizing the magnetic sensor for accurate end-of-stroke confirmation.
Module Tab Welding
Applies consistent 628 N clamping force at 0.5 MPa to hold battery modules securely in place during automated tab welding processes.
Pack Assembly Handling
Actuates pushers and diverters over the 700 mm stroke to maneuver heavy battery packs between assembly stations on the production line.
Is the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X700S the Right Cylinder?
This 40 mm bore cylinder provides 628 N of push force at 0.5 MPa. If your battery stacking or handling application requires less force, stepping down to a 32 mm bore yields 402 N; if you need more clamping power for pack assembly, a 50 mm bore offers 982 N. Because this model features a 700 mm stroke, the unsupported 16 mm rod is susceptible to bending under side loads. For tab welding or heavy cell handling, use an external guide rail or a guided cylinder to prevent rod bearing damage.
When ordering a replacement, match these five points exactly: 40 mm bore, 700 mm stroke, PT1/4 port thread, basic mounting (no bracket), and the built-in magnet (-S). Note that the SC series is a tie-rod cylinder and is shorter than ISO 15552 profiles, so it is not a direct dimensional replacement for ISO cylinders.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X700S FAQ
The B06- prefix indicates that this is a battery-manufacturing dedicated cylinder. It is mechanically identical to the standard AirTAC SC40X700S, featuring the same 40 mm bore, 700 mm stroke, 16 mm rod, and PT1/4 port. The prefix simply designates its optimized application for battery production lines.
The SC cylinder does not hold its position or support loads when air pressure is lost, and the adjustable cushion only decelerates the piston near stroke ends. Because the 700 mm stroke creates a long unsupported rod, external guide rails or a guided cylinder must be used to manage side loads and prevent rod bending.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X700S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.