Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X75S
The AirTAC B06-SC Battery-Dedicated Standard Cylinder B06-SC40X75S is a genuine double-acting standard air cylinder with a Ø40mm bore and 75mm stroke, PT1/4 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ40 mm
- Stroke75 mm
- Port sizePT1/4
- Acting typeDouble acting
- Rod threadM12×1.25
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X75S
The AirTAC B06-SC40X75S is a double-acting tie-rod pneumatic cylinder engineered for battery manufacturing environments. The B06- prefix designates this as a battery-manufacturing dedicated variant of the standard SC40X75S, meaning it is mechanically identical to the base model but optimized for cell, module, and pack assembly lines. It features a 40mm bore and a 75mm stroke.
Delivering 628N of push force at 0.5 MPa and 1130N at 0.9 MPa, it provides robust actuation for handling tasks. The built-in S suffix magnet allows CMSG, DMSG, or EMSG sensors to clamp directly onto the barrel for precise position detection. It uses a 16mm piston rod, a PT1/4 port, and includes 21mm adjustable cushions to decelerate the piston smoothly at stroke ends.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X75S Technical Specifications
| Model | Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X75S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø40 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (approx.) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X75S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X75S Is Used
Cell Stacking
Provides the precise 628N push force and 75mm travel needed to align and stack battery cells tightly during module assembly.
Tab Welding Press
Uses the built-in magnet for exact position confirmation before applying pressure to battery tabs during ultrasonic welding.
Module Handling
Actuates sorting gates and lifting stops on conveyor lines moving battery modules between production stages.
Is the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X75S the Right Cylinder?
This 40mm bore generates 628N push force at 0.5 MPa. If your battery stacking or handling process requires less force, consider stepping down to a 32mm bore (402N at 0.5 MPa). For heavier pack manipulation, a 50mm bore (982N at 0.5 MPa) is the next logical step up. At a 75mm stroke, side-load stress on the rod bearing is minimal, but always ensure the load is axially aligned to prevent premature seal wear.
When specifying a replacement, match these five critical points: 40mm bore, 75mm stroke, PT1/4 port thread, basic mounting (no bracket), and the built-in magnet (-S). Note that the SC series is a tie-rod cylinder and is shorter than ISO 15552 profiles, so it is not a direct dimensional replacement for ISO cylinders.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X75S FAQ
The B06- prefix indicates this is a battery-manufacturing dedicated cylinder. It is mechanically identical to the standard AirTAC SC40X75S, offering the same 40mm bore, 75mm stroke, 1130N force at 0.9 MPa, and built-in magnet, but is designated for battery cell and pack assembly lines.
No, the 21mm adjustable cushion only decelerates the piston near the end of the stroke to soften impact. It does not lock or hold the load. If your application requires position holding without live air pressure, you must use an external mechanical lock or pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X75S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.