Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X800
The AirTAC B06-SC Battery-Dedicated Standard Cylinder B06-SC40X800 is a genuine double-acting standard air cylinder with a Ø40mm bore and 800mm stroke, PT1/4 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ40 mm
- Stroke800 mm
- Port sizePT1/4
- Acting typeDouble acting
- Rod threadM12×1.25
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X800
The B06-SC40X800 is an AirTAC double-acting tie-rod pneumatic cylinder built for battery-manufacturing lines. The B06- prefix designates it as a battery-industry dedicated variant of the standard SC40X800, meaning it is mechanically identical to the base model. It delivers 628 N of push force at 0.5 MPa and features a 16 mm piston rod with a PT1/4 port.
With an 800 mm stroke, this cylinder provides the extended travel needed for cell handling and module transfer. It incorporates adjustable cushions measuring 21 mm to decelerate the piston smoothly at stroke ends. The body length A is 142 mm, yielding a total extended length of 942 mm, and it operates reliably within a standard temperature range of -20 to +70 C using TPU seals.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X800 Technical Specifications
| Model | Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X800 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø40 mm |
| Stroke | 800 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (approx.) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X800
| SC | Standard tie-rod cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×800 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X800 Is Used
Battery Cell Stacking
Drives the extended linear movement required to align and stack battery cells precisely during automated module assembly.
Module Transfer
Pushes battery modules along extended conveyor lines, utilizing the full 800 mm stroke to shuttle heavy packs between workstations.
Tab Welding Positioning
Positions battery tabs for laser welding with consistent push force, ensuring accurate electrical connections across the production line.
Is the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X800 the Right Cylinder?
This 40 mm bore generates 628 N push at 0.5 MPa. If your battery assembly process requires less force, stepping down to a 32 mm bore yields 402 N, while a 50 mm bore provides 982 N for heavier jigs. Because this model features an 800 mm stroke, the 16 mm rod is susceptible to bending under side loads. For long-stroke applications, implement an external guide rail or select a guided cylinder to prevent rod-bearing damage.
When specifying a replacement, match these five points exactly: 40 mm bore, 800 mm stroke, PT1/4 port thread, basic mounting style, and no built-in magnet. Note that the SC series is a tie-rod cylinder and is shorter than ISO 15552 profiles, so it is not a direct ISO replacement.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X800 FAQ
The B06- prefix indicates that this is an AirTAC battery-manufacturing dedicated cylinder. Mechanically and dimensionally, it is identical to the standard SC40X800, featuring the same 40 mm bore, 800 mm stroke, and PT1/4 port.
No, the 16 mm rod should not bear direct side loads over an 800 mm stroke. The adjustable cushion only decelerates the piston at end caps and does not hold the load. You must use an external guide mechanism to prevent rod bending.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X800
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.