Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X800S
AirTAC B06-SC40X800S Battery-Optimized Standard Cylinder Specifications
- Model: B06-SC40X800S
- Series: B06-SC (Battery Special Series)
- Bore size: 40mm
- Stroke: 800mm
- Operating pressure: 0.05–0.8 MPa
- Cushioning: Adjustable rubber buffer (both ends)
- Mounting type: Basic type (Multiple options available: MF1/MF2/MB)
- Piston speed: 50–800 mm/s
- Ambient temperature: -20℃ to 80℃
- Port size: M5x0.8 (standard), optional NPT1/8
- Material: Aluminum alloy cylinder tube, NBR seals
- Position detection: Built-in magnet (D-M9N magnetic switch compatible)
- Weight: 3.8kg ±2%
- Dimensions: 880mm(L) × 50mm(W) × 50mm(H)
- ISO standard: 6432 compliant
- Protection class: IP54 (standard), IP67 optional
High-efficiency pneumatic cylinder specifically engineered for battery-powered systems, featuring ultra-low friction design (≤0.012 dynamic friction coefficient) and optimized air consumption. The anodized barrel incorporates wear-resistant technology with 25μm hardened surface layer, ensuring 3,000km+ service life under continuous operation.
- Electric vehicle battery pack assembly lines
- Automated warehouse lifting mechanisms
- Portable medical oxygen concentrators
- Solar panel positioning systems
- Lithium cell compression fixtures
- Robotic material handling in cleanrooms
Installation protocol:
Requires precise alignment (≤0.1mm/m parallelism tolerance) with guided shafts.
Lubricate with ISO VG32 turbine oil before initial use. Maintain 1.5× bore diameter
clearance around cylinder for heat dissipation in high-cycle applications.
Critical note:
Not compatible with phosphate ester-based lubricants. Use only petroleum-based
hydraulic fluids. Maximum side load: 25N at mid-stroke. For vertical mounting,
always install with rod end downward to prevent seal deformation.
| Property | Property Value |
|---|---|
| sku | B06-SC40X800S |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.