Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X100
The AirTAC B06-SC Battery-Dedicated Standard Cylinder B06-SC50X100 is a genuine double-acting standard air cylinder with a Ø50mm bore and 100mm stroke, PT1/4 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ50 mm
- Stroke100 mm
- Port sizePT1/4
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X100
The B06-SC50X100 is AirTAC's battery-manufacturing dedicated variant of the standard SC50X100 single-rod, double-acting tie-rod cylinder. The B06- prefix designates its deployment on cell, module, and pack assembly lines while retaining the exact physical specifications of the base model. It delivers a push force of 982 N at 0.5 MPa and features a 20 mm piston rod with a PT1/4 port.
With a 100 mm stroke and a body length A of 150 mm, this unit provides a total extended length of 250 mm. It includes adjustable cushions measuring 21 mm to decelerate the piston at stroke ends, ensuring smooth operation in automated battery handling and stacking tasks.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X100 Technical Specifications
| Model | Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X100 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø50 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (approx.) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X100
| SC | Standard tie-rod cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X100 Is Used
Cell Stacking
Provides the precise 982 N force and 100 mm travel needed for aligning and stacking prismatic battery cells during module assembly.
Tab Welding Press
Applies consistent clamping pressure on battery tabs prior to laser welding, ensuring electrical contact without deforming the thin copper or aluminum foils.
Pack Handling
Actuates sorting and routing gates on battery pack conveyor lines, using its 20 mm rod to reliably push modules into test stations.
Is the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X100 the Right Cylinder?
This 50 mm bore provides 982 N push force at 0.5 MPa. If your battery stacking application requires less force, step down to the 40 mm bore (628 N push); for heavier pack manipulation, step up to the 63 mm bore (1559 N push). Because this model lacks a built-in magnet, position sensing requires external methods.
When replacing this cylinder, match all five points: 50 mm bore, 100 mm stroke, PT1/4 port thread, basic mounting (no bracket), and no magnet. Although 100 mm is a standard stroke, always verify that side loads are managed by external guides to prevent rod bearing wear.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X100 FAQ
The B06- prefix indicates this is an AirTAC battery-manufacturing dedicated cylinder. Mechanically and dimensionally, it is identical to the standard SC50X100, featuring the same 50 mm bore, 100 mm stroke, and 982 N push force at 0.5 MPa.
At the maximum operating pressure of 0.9 MPa, the B06-SC50X100 generates a push thrust of 1767 N. The theoretical maximum force at 1.0 MPa is 200 kgf.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X100
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.