Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X100S
The AirTAC B06-SC Battery-Dedicated Standard Cylinder B06-SC50X100S is a genuine double-acting standard air cylinder with a Ø50mm bore and 100mm stroke, PT1/4 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ50 mm
- Stroke100 mm
- Port sizePT1/4
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X100S
The AirTAC B06-SC50X100S is a double-acting tie-rod pneumatic cylinder engineered for battery manufacturing environments, offering 982 N of push force at 0.5 MPa. The B06- prefix designates this as a battery-manufacturing dedicated variant of the standard SC50X100S, meaning it is mechanically identical to the base model but highlighted for cell and pack assembly lines.
Featuring a 50 mm bore and 100 mm stroke, this unit includes a built-in magnet for position sensing via CMSG or DMSG reed switches. It utilizes a 20 mm piston rod, PT1/4 ports, and adjustable cushions measuring 21 mm to decelerate the piston at stroke ends, ensuring reliable operation within its 150 mm body length A.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X100S Technical Specifications
| Model | Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X100S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø50 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (approx.) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X100S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X100S Is Used
Cell Stacking Press
Provides consistent 982 N clamping force at 0.5 MPa for aligning and stacking prismatic battery cells during module assembly.
Module Handling
Actuates 100 mm stroke gating or pushing mechanisms to route battery modules along the pack assembly conveyor line.
Tab Welding Clamp
Uses the integrated magnet with DMSG sensors to confirm rod position before the welding head descends on battery tabs.
Is the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X100S the Right Cylinder?
This 50 mm bore provides 982 N push and 825 N pull at 0.5 MPa. If your battery handling fixture requires less force, stepping down to a 40 mm bore yields 628 N push, while moving up to a 63 mm bore provides 1559 N. For a 100 mm stroke, side-load stress on the 20 mm rod is moderate, but always ensure the load is axially aligned to prevent premature rod-bearing wear.
When specifying a replacement, match these five attributes exactly: 50 mm bore, 100 mm stroke, PT1/4 port thread, basic mounting style, and the built-in magnet (-S). This SC tie-rod cylinder is shorter than an ISO 15552 unit and is not dimensionally interchangeable with that profile.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X100S FAQ
The B06- prefix indicates this is an AirTAC battery-manufacturing dedicated cylinder. It is mechanically identical to the standard SC50X100S, featuring the same 50 mm bore, 100 mm stroke, and built-in magnet, but is designated for cell and pack assembly applications.
At the maximum operating pressure of 0.9 MPa, the SC50X100S generates a push force of 1767 N. At a standard 0.5 MPa, it delivers 982 N of push force and 825 N of pull force.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.