Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X200
The AirTAC B06-SC Battery-Dedicated Standard Cylinder B06-SC50X200 is a genuine double-acting standard air cylinder with a Ø50mm bore and 200mm stroke, PT1/4 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ50 mm
- Stroke200 mm
- Port sizePT1/4
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X200
The B06-SC50X200 is AirTAC's battery-manufacturing dedicated variant of the standard SC50X200 tie-rod cylinder. The B06- prefix designates its use in cell, module, and pack assembly lines, but mechanically it is identical to the base SC50X200 double-acting actuator. It delivers a push force of 982 N at 0.5 MPa and a pull force of 825 N.
Featuring a 20 mm piston rod, a PT1/4 port, and 21 mm adjustable cushions, this cylinder handles a 200 mm stroke efficiently. The body length A is 150 mm, giving an approximate extended length of 350 mm. It operates on filtered air between 0.15 and 1.0 MPa, reaching a maximum thrust of 1767 N at 0.9 MPa.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X200 Technical Specifications
| Model | Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X200 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø50 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (approx.) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X200
| SC | Standard tie-rod cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X200 Is Used
Cell Stacking
Provides the precise 982 N push force at 0.5 MPa needed for aligning and stacking battery cells in module assembly.
Pack Handling
Moves battery packs along the production line with a 200 mm stroke, utilizing adjustable cushions to soften end-of-stroke impact.
Tab Welding Press
Actuates welding heads for battery tabs, taking advantage of the 20 mm rod diameter for stable and reliable positioning.
Is the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X200 the Right Cylinder?
This 50 mm bore provides 982 N of push force at 0.5 MPa. If your battery stacking or handling application requires less force, stepping down to a 40 mm bore yields 628 N. For heavier pack manipulation, a 63 mm bore provides 1559 N. When replacing this unit, match the 50 mm bore, 200 mm stroke, PT1/4 port thread, basic mounting, and non-magnet configuration exactly.
At a 200 mm stroke, side loads can stress the rod bearing. For battery cell handling or tabbing processes that impose lateral forces, use an external guide rail or a guided cylinder to prevent rod bending and premature seal wear.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X200 FAQ
The B06- prefix indicates this is an AirTAC battery-manufacturing dedicated cylinder. It is mechanically identical to the standard SC50X200, featuring the same 50 mm bore, 200 mm stroke, and 982 N push force at 0.5 MPa.
No, the SC series is double-acting and does not hold position without live air pressure. The adjustable cushions only decelerate the piston near the stroke end. To hold a load securely, you must use an external mechanical lock or a pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X200
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.