Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X25
The AirTAC B06-SC Battery-Dedicated Standard Cylinder B06-SC50X25 is a genuine double-acting standard air cylinder with a Ø50mm bore and 25mm stroke, PT1/4 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ50 mm
- Stroke25 mm
- Port sizePT1/4
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X25
The B06-SC50X25 is AirTAC's battery-manufacturing dedicated variant of the standard SC50X25 tie-rod cylinder. The B06- prefix designates its use in cell, module, and pack assembly lines without altering the physical specs of the base model. As a double-acting pneumatic cylinder, it provides 982 N of push force at 0.5 MPa and 825 N of pull force.
This short 25 mm stroke is built for rapid, tight-cycle operations. It features a 20 mm rod diameter, a PT1/4 port, and 21 mm adjustable cushions to soften end-of-stroke impact. The standard TPU seals support an operating temperature range of -20 to +70 C, and the compact body length A of 150 mm makes it easy to integrate into dense battery assembly machinery.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X25 Technical Specifications
| Model | Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X25 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø50 mm |
| Stroke | 25 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (approx.) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X25
| SC | Standard tie-rod cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X25 Is Used
Cell Stacking Press
Applies consistent 982 N clamping pressure at 0.5 MPa for aligning and stacking battery cells during module assembly.
Tab Welding Clamp
Uses the short 25 mm stroke for rapid extension and retraction to hold battery tabs firmly during ultrasonic welding.
Pack Handling Diverter
Actuates quickly on the conveyor line to route battery packs into specific testing or packaging stations.
Is the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X25 the Right Cylinder?
This 50 mm bore offers a solid step up from the 40 mm bore (which provides 628 N push at 0.5 MPa) when your tabbing or handling fixture needs more clamping authority. If you require less force to save space and air consumption, stepping down to the 40 mm bore is recommended. Because the stroke is only 25 mm, rod-bearing bending is not a concern here, allowing safe direct mounting without external guides.
When specifying a replacement, match these five points exactly: 50 mm bore, 25 mm stroke, PT1/4 port thread, basic mounting style, and no built-in magnet. Note that the SC is a tie-rod cylinder and is shorter than ISO 15552 profile cylinders, so it is not a direct dimensional replacement for ISO standards.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X25 FAQ
The B06- prefix indicates this is an AirTAC battery-manufacturing dedicated cylinder. It is mechanically identical to the standard SC50X25, offering the same 50 mm bore, 25 mm stroke, and 982 N push force at 0.5 MPa, but is designated for battery industry applications.
No, this is a double-acting air cylinder and cannot hold a load or position without live air pressure. The adjustable cushion only decelerates the piston near the stroke end to reduce impact; it does not act as a brake. A mechanical lock or external rod brake is required for position holding.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X25
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.