Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X450
The AirTAC B06-SC Battery-Dedicated Standard Cylinder B06-SC50X450 is a genuine double-acting standard air cylinder with a Ø50mm bore and 450mm stroke, PT1/4 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ50 mm
- Stroke450 mm
- Port sizePT1/4
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X450
The B06-SC50X450 is an AirTAC double-acting tie-rod pneumatic cylinder where the B06- prefix designates it as a battery-manufacturing dedicated variant of the standard SC50X450. It is mechanically identical to the base model, offering 982 N of push thrust at 0.5 MPa and utilizing a 20 mm piston rod.
With a 450 mm stroke and a body length A of 150 mm, this unit provides an extended length of 600 mm. It features adjustable cushions measuring 21 mm at both ends and operates efficiently within a temperature range of -20 to +70 C using standard TPU seals.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X450 Technical Specifications
| Model | Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X450 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø50 mm |
| Stroke | 450 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (approx.) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X450
| SC | Standard tie-rod cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×450 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X450 Is Used
Cell Stacking Press
Applies consistent 1374 N push force at 0.7 MPa for aligning and stacking prismatic battery cells during module assembly.
Pack Handling
Extends 450 mm to push battery packs onto transfer conveyors or index them to the next welding station.
Tab Welding Clamp
Holds battery tabs firmly in position for automated laser welding, utilizing the 20 mm rod for stable actuation.
Is the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X450 the Right Cylinder?
This 50 mm bore provides 982 N push force at 0.5 MPa. If your battery stacking or handling process requires less force, stepping down to a 40 mm bore yields 628 N, while moving up to a 63 mm bore provides 1559 N. Ensure your replacement matches five points: 50 mm bore, 450 mm stroke, PT port thread, basic mounting, and no magnet.
Because the 450 mm stroke creates a long unsupported rod extension, side loads can cause bending and premature rod-bearing wear. For battery cell handling or heavy pack assembly, use an external guide rail or a guided cylinder to prevent rod deflection and maintain precise alignment.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X450 FAQ
The B06- prefix indicates this is a battery-manufacturing dedicated variant of the standard AirTAC SC50X450. It is mechanically identical to the base SC cylinder, offering the exact same 50 mm bore, 450 mm stroke, PT ports, and force specifications.
At the maximum operating pressure of 0.9 MPa, this 50 mm bore cylinder generates a push force of 1767 N. At a standard 0.5 MPa, it provides 982 N of push thrust.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X450
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.