Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X50
The AirTAC B06-SC Battery-Dedicated Standard Cylinder B06-SC50X50 is a genuine double-acting standard air cylinder with a Ø50mm bore and 50mm stroke, PT1/4 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ50 mm
- Stroke50 mm
- Port sizePT1/4
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X50
The B06-SC50X50 is AirTAC's battery-manufacturing dedicated variant of the standard SC50X50 tie-rod cylinder. The B06- prefix designates its use in battery cell, module, and pack assembly lines, but mechanically it is identical to the base SC50X50. It is a double-acting pneumatic cylinder featuring a 50mm bore and a 50mm stroke.
Delivering 982N of push force at 0.5 MPa (and up to 1767N at 0.9 MPa), this unit is built for robust handling tasks. It uses a 20mm piston rod, a PT1/4 port, and adjustable cushions measuring 21mm to absorb end-of-stroke impact. The standard TPU seals support an operating temperature range of -20 to +70 C.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X50 Technical Specifications
| Model | Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X50 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø50 mm |
| Stroke | 50 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (approx.) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X50
| SC | Standard tie-rod cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X50 Is Used
Cell Stacking Presses
Provides the precise 982N push force at 0.5 MPa needed to align and press battery cell layers during automated stacking processes.
Module Handling
Ideal for short-stroke diversion and positioning of battery modules on assembly conveyors, utilizing its 50mm stroke for rapid cycling.
Tab Welding Fixturing
Clamps battery tabs securely in place for laser welding operations, relying on the 20mm rod and adjustable cushions for stable holding.
Is the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X50 the Right Cylinder?
This 50mm bore offers 982N push force at 0.5 MPa. If your battery stacking or handling process requires less force, stepping down to the 40mm bore yields 628N. For heavier pack manipulation, the 63mm bore provides 1559N. Because this is a short 50mm stroke, side-load bending on the 20mm rod is minimal, but always verify rod bearing loads.
When replacing this cylinder, match these five attributes exactly: 50mm bore, 50mm stroke, PT1/4 port thread, basic mounting (no bracket), and no built-in magnet. The SC is a tie-rod design and is shorter than ISO 15552 cylinders, so it is not a direct ISO replacement.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X50 FAQ
The B06- prefix indicates this is an AirTAC cylinder dedicated to battery-manufacturing applications. It is mechanically identical to the standard SC50X50, offering the same 50mm bore, 50mm stroke, and 982N push force at 0.5 MPa, with no changes to physical specifications.
No, the B06-SC50X50 is a double-acting cylinder and cannot hold a load without live air pressure. The adjustable cushion only decelerates the piston near the stroke end to soften impact; it does not act as a brake or locking mechanism.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X50
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.