Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X600
The AirTAC B06-SC Battery-Dedicated Standard Cylinder B06-SC50X600 is a genuine double-acting standard air cylinder with a Ø50mm bore and 600mm stroke, PT1/4 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ50 mm
- Stroke600 mm
- Port sizePT1/4
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X600
The B06-SC50X600 is an AirTAC battery-manufacturing dedicated pneumatic cylinder, mechanically identical to the standard SC50X600. The B06- prefix simply designates its optimized supply line for cell, module, and pack assembly operations. This double-acting tie-rod cylinder delivers 982 N of push force at 0.5 MPa, utilizing a 20 mm piston rod and a PT1/4 port.
With a 600 mm stroke, this model provides the extended travel needed for tabbing, stacking, or long-reach handling in battery production lines. It features adjustable cushions (21 mm) to decelerate the piston smoothly at stroke ends, and its body length A is 150 mm. The standard TPU seals operate reliably between -20 and +70 C.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X600 Technical Specifications
| Model | Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X600 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø50 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (approx.) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X600
| SC | Standard tie-rod cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X600 Is Used
Cell Stacking
Provides the 600 mm extended reach and 982 N force required to precisely layer and align battery cells during automated stacking processes.
Module Handling
Moves battery modules along assembly lines, utilizing its adjustable cushions to prevent impact damage during rapid translocation.
Pack Transfer
Drives long-stroke pusher mechanisms to route finished battery packs between conveyor belts or into testing fixtures.
Is the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X600 the Right Cylinder?
This 50 mm bore generates 982 N push at 0.5 MPa; step down to a 40 mm bore (628 N) for lighter battery cell clamping, or up to a 63 mm bore (1559 N) for heavier pack manipulation. At 600 mm of stroke, the 20 mm rod is subject to bending under side loads—use an external guide rail or a guided cylinder to prevent rod-bearing wear and ensure precise tab alignment.
When replacing this unit, match these five points exactly: 50 mm bore, 600 mm stroke, PT1/4 port thread, basic mounting (no bracket), and no built-in magnet. It is a tie-rod design, shorter than an ISO 15552 cylinder, so verify overall length if swapping non-AirTAC units.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X600 FAQ
The B06- prefix indicates this is a battery-manufacturing dedicated variant of the standard AirTAC SC50X600. It is mechanically identical to the base model, offering the same 50 mm bore, 600 mm stroke, and 982 N push force at 0.5 MPa, simply designated for battery industry supply.
No, this is a double-acting air cylinder and cannot hold position without live air pressure. The adjustable cushion only decelerates the piston at stroke end; a mechanical lock or external pilot-operated check valve is required to hold a vertical load safely.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X600
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.