Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X700
The AirTAC B06-SC Battery-Dedicated Standard Cylinder B06-SC50X700 is a genuine double-acting standard air cylinder with a Ø50mm bore and 700mm stroke, PT1/4 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ50 mm
- Stroke700 mm
- Port sizePT1/4
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X700
The B06-SC50X700 is an AirTAC double-acting tie-rod pneumatic cylinder engineered for battery manufacturing lines. The B06- prefix designates this as a battery-industry dedicated variant of the standard SC50X700, meaning it shares the exact same mechanical architecture without any proprietary modifications. It provides a push force of 982 N at 0.5 MPa and 1767 N at 0.9 MPa, making it well-suited for cell handling and module positioning.
This model features a 700 mm stroke and a 20 mm piston rod. It incorporates adjustable cushions with a 21 mm length to decelerate the piston at stroke ends. The body length A is 150 mm, yielding a total extended length of approximately 850 mm. It operates on filtered air between 0.15 and 1.0 MPa using standard TPU seals within a -20 to +70 C temperature range.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X700 Technical Specifications
| Model | Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X700 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø50 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (approx.) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X700
| SC | Standard tie-rod cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X700 Is Used
Cell Stacking Presses
Provides the 982 N push force at 0.5 MPa required to align and compress prismatic battery cells during automated stacking operations.
Module Handling
Utilizes its 700 mm stroke to transfer battery modules across conveyor belts between welding and packaging stations.
Tab Welding Positioning
Extends to clamp battery packs securely in place, ensuring precise alignment for automated laser tab welding equipment.
Is the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X700 the Right Cylinder?
This 50 mm bore generates 982 N of push force at 0.5 MPa. If your battery stacking or handling process requires less force, stepping down to a 40 mm bore yields 628 N. For heavier pack manipulation, a 63 mm bore provides 1559 N. When ordering a replacement, match the 50 mm bore, 700 mm stroke, PT1/4 port thread, basic mounting style, and non-magnet configuration exactly.
Because this cylinder features a 700 mm stroke, the extended 20 mm rod is susceptible to bending under side loads. For battery line applications involving heavy off-center loads or pressing tasks, use an external guide rail or a dedicated guided cylinder to prevent rod bearing damage and premature wear.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X700 FAQ
The B06- prefix indicates this is a battery-manufacturing dedicated variant of the standard AirTAC SC50X700. It is mechanically identical to the base model, offering the same 50 mm bore, 700 mm stroke, and 1767 N thrust at 0.9 MPa, simply designated for battery industry applications.
No, this is a double-acting pneumatic cylinder and does not lock or hold position without live air pressure. The adjustable cushion only decelerates the piston at the end of the stroke. To hold a load securely during a pressure loss, an external mechanical lock or pilot-operated check valve is required.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X700
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.