Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X700S
The AirTAC B06-SC Battery-Dedicated Standard Cylinder B06-SC50X700S is a genuine double-acting standard air cylinder with a Ø50mm bore and 700mm stroke, PT1/4 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ50 mm
- Stroke700 mm
- Port sizePT1/4
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X700S
The B06-SC50X700S is an AirTAC double-acting tie-rod pneumatic cylinder engineered for battery-manufacturing lines. The B06- prefix designates this as a battery-industry dedicated variant of the standard SC50X700S, meaning it shares the exact same mechanical specs while being tailored for cell, module, and pack assembly operations. It delivers a push force of 982 N at 0.5 MPa and a pull force of 825 N.
Featuring a 50 mm bore and a 700 mm stroke, this unit includes a built-in magnet for CMSG/DMSG/EMSG sensor tracking along the 150 mm body length A. It uses a 20 mm piston rod, PT1/4 ports, and 21 mm adjustable cushions to manage end-of-stroke impact. The standard TPU seals support an operating temperature range of -20 to +70 C.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X700S Technical Specifications
| Model | Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X700S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø50 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (approx.) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X700S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X700S Is Used
Cell Stacking Press
Provides the 982 N push force at 0.5 MPa needed to align and compress prismatic battery cells during the stacking and binding process.
Module Handling
Uses its 700 mm stroke to extend and retract across a conveyor belt, transferring assembled battery modules between robotic welding stations.
Tab Welding Clamp
Utilizes the built-in magnet for precise position confirmation while clamping battery tabs prior to laser welding.
Is the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X700S the Right Cylinder?
This 50 mm bore provides 982 N of push force at 0.5 MPa. If your battery stacking or handling fixture requires less force, stepping down to a 40 mm bore yields 628 N. For heavier pack manipulation, a 63 mm bore offers 1559 N. Because this model features a 700 mm stroke, the unsupported 20 mm rod is susceptible to bending under side loads; use an external guide rail or a guided cylinder to prevent rod-bearing damage.
When sourcing a replacement, match these five attributes exactly: the 50 mm bore, 700 mm stroke, PT1/4 port thread, basic mounting style, and the built-in magnet (S suffix). Note that the SC series is a tie-rod design and is shorter than an ISO 15552 cylinder, so it is not a direct dimensional replacement for ISO profiles.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X700S FAQ
The B06- prefix indicates that this is an AirTAC battery-manufacturing dedicated cylinder. It is mechanically and dimensionally identical to the standard SC50X700S, featuring the same 50 mm bore, 700 mm stroke, and 982 N push force at 0.5 MPa, but is designated for battery production environments.
No, the 20 mm rod on a 700 mm stroke should not bear direct side loads. To prevent bending and premature rod-bearing wear, you must use an external guide mechanism or select a guided cylinder for your battery assembly fixture.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X700S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.