Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X75
The AirTAC B06-SC Battery-Dedicated Standard Cylinder B06-SC50X75 is a genuine double-acting standard air cylinder with a Ø50mm bore and 75mm stroke, PT1/4 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ50 mm
- Stroke75 mm
- Port sizePT1/4
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X75
The B06-SC50X75 is AirTAC's battery-manufacturing dedicated variant of the standard SC50X75 double-acting pneumatic cylinder. The B06- prefix designates its optimization for cell, module, and pack assembly lines, though its physical specifications remain mechanically identical to the base SC50X75 model. It delivers a push force of 982 N at 0.5 MPa and a pull force of 825 N.
Featuring a 50 mm bore and a 75 mm stroke, this tie-rod cylinder utilizes a 20 mm piston rod and PT1/4 porting. The adjustable cushion extends 21 mm to decelerate the piston near the end caps. With a standard TPU seal, it operates reliably in temperatures from -20 to +70 C, generating a robust 1767 N of thrust at 0.9 MPa.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X75 Technical Specifications
| Model | Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X75 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø50 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (approx.) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X75
| SC | Standard tie-rod cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X75 Is Used
Cell Stacking
Provides the precise 982 N force at 0.5 MPa needed to press and align battery cells during automated stacking processes.
Module Handling
Actuates indexing and positioning mechanisms for battery modules moving along assembly conveyors.
Tab Welding
Clamps battery tabs securely in place with a 75 mm stroke prior to ultrasonic or laser welding operations.
Is the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X75 the Right Cylinder?
This 50 mm bore provides a middle-ground force output; step down to a 40 mm bore for 628 N at 0.5 MPa for lighter tabbing tasks, or step up to a 63 mm bore for 1559 N if moving heavier battery packs. At a 75 mm stroke, side-load stress on the 20 mm rod is minimal, but always ensure the load is axially aligned to prevent premature rod bearing wear.
When replacing this unit, match the 50 mm bore, 75 mm stroke, PT1/4 thread, basic mounting style, and non-magnet configuration. Because the SC is a tie-rod cylinder, it is dimensionally shorter than ISO 15552 profiles and is not a direct replacement for them.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X75 FAQ
The B06- prefix indicates this is an AirTAC battery-manufacturing dedicated cylinder. It is mechanically identical to the standard SC50X75, offering the same 50 mm bore, 75 mm stroke, and 982 N push force at 0.5 MPa, but is designated for battery production lines.
No, the SC series is double-acting and does not lock or hold position without live air pressure. The adjustable cushion only decelerates the piston at stroke ends. To hold a load safely during a pressure loss, an external mechanical lock or pilot-operated check valve is required.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X75
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.