Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X75S
The AirTAC B06-SC Battery-Dedicated Standard Cylinder B06-SC50X75S is a genuine double-acting standard air cylinder with a Ø50mm bore and 75mm stroke, PT1/4 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ50 mm
- Stroke75 mm
- Port sizePT1/4
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X75S
The B06-SC50X75S is an AirTAC double-acting tie-rod pneumatic cylinder engineered for battery manufacturing environments. The "B06-" prefix designates this as a battery-manufacturing dedicated variant of the standard SC50X75S, meaning it is mechanically identical to the base model with a 50mm bore and 75mm stroke. It provides a push force of 982 N at 0.5 MPa and a pull force of 825 N.
This unit includes a built-in magnet for position sensing and uses standard TPU seals rated for -20 to +70 C. It features a 20mm rod diameter, a PT1/4 port, and 21mm adjustable cushions to decelerate the piston at stroke ends. With a body length A of 150mm, the total extended length is 225mm.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X75S Technical Specifications
| Model | Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X75S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø50 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (approx.) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X75S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X75S Is Used
Cell Stacking Press
Applies consistent 982 N clamping force at 0.5 MPa to align and press lithium-ion battery cells during the stacking process.
Module Handling
Uses the 75mm stroke to push or divert battery modules along assembly conveyors with precise magnetic position feedback.
Tab Welding Clamp
Holds battery tabs firmly in place for automated laser welding, relying on adjustable cushions to prevent end-of-stroke impact.
Is the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X75S the Right Cylinder?
This 50mm bore generates 982 N of push force at 0.5 MPa. If your battery stacking or handling line requires less force, step down to the 40mm bore (628 N at 0.5 MPa); for heavier pack manipulation, step up to the 63mm bore (1559 N at 0.5 MPa). The 75mm stroke is well within the 1200mm maximum for this bore, keeping the rod highly rigid without needing external guides.
When ordering a replacement, match these five points: 50mm bore, 75mm stroke, PT1/4 port thread, basic mounting (no bracket), and the built-in magnet (-S suffix). This AirTAC tie-rod cylinder is dimensionally shorter than an ISO 15552 unit and will not direct replace those profiles.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X75S FAQ
The B06- prefix indicates this is an AirTAC battery-manufacturing dedicated cylinder. It is mechanically and dimensionally identical to the standard SC50X75S, featuring the same 50mm bore, 75mm stroke, PT1/4 port, and magnetic piston.
No, the SC cylinder does not lock or hold position without live air pressure. The adjustable cushion only decelerates the piston near the stroke end. For vertical battery handling, you must use an external rod brake, mechanical lock, or pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X75S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.