Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC50X800
AirTAC B06-SC50X800 Battery-Specific Standard Cylinder Specifications
- Model: B06-SC50X800
- Type: ISO 6432 compliant single-acting spring return cylinder
- Bore size: Ø50 mm (±0.1mm manufacturing tolerance)
- Stroke: 800 mm (customizable from 25-1000mm)
- Operating pressure: 0.05-1.0 MPa (7-145 psi)
- Cushioning: Adjustable pneumatic cushioning with rubber buffer
- Mounting: Basic type (MF1) with optional foot mounts (MP2/MB1)
- Port size: G3/8 (BSPP thread) dual ports
- Piston rod thread: M20×1.5 external thread (18mm rod diameter)
- Temperature range: -20℃ to 80℃ (dry air required below 0℃)
- Tube material: Anodized aluminum alloy (AL6063-T5)
- Rod material: Hard chrome-plated stainless steel (SUS304)
- Seal material: NBR (Nitrile) standard, optional FKM/Viton
- Protection rating: IP40 (dust protected)
- Weight: Approximately 5.8 kg (12.8 lbs) ±3%
- Dimensions: 880mm(L) × 70mm(W) × 70mm(H) (stroke extended)
High-torque pneumatic cylinder specifically engineered for battery manufacturing environments. Features anti-corrosion treatment and low-friction seals optimized for intermittent duty cycles. The reinforced piston rod withstands side loads up to 150N, with built-in magnetic sensor slots (non-inductive models available). Requires ISO 8573-1 class 3-4-3 compressed air.
- Lithium battery cell compression/pressing systems
- Battery module assembly fixture actuation
- EV battery pack leak testing equipment
- Electrolyte filling station automation
- Battery terminal welding positioners
Installation guidelines:
Maintain 0.05mm/m alignment tolerance during mounting. Use flexible couplings when stroke >500mm.
Lubricate with ISO VG32 turbine oil if air line lubricator isn't installed. Annual seal replacement recommended.
| Property | Property Value |
|---|---|
| sku | B06-SC50X800 |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.