Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC63X1000
The AirTAC B06-SC Battery-Dedicated Standard Cylinder B06-SC63X1000 is a genuine double-acting standard air cylinder with a Ø63mm bore and 1000mm stroke, PT1/4 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ63 mm
- Stroke1000 mm
- Port sizePT1/4
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 28 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC63X1000
The B06-SC63X1000 is AirTAC's battery-manufacturing dedicated variant of the standard SC63X1000 tie-rod cylinder. The B06- prefix designates its use in cell, module, and pack assembly lines, but mechanically it is identical to the base SC63X1000. It is a double-acting pneumatic actuator offering 1559 N of push force at 0.5 MPa.
Featuring a 63 mm bore and a 1000 mm stroke, this unit utilizes a 20 mm piston rod and PT1/4 ports. It includes adjustable cushions measuring 28 mm to decelerate the piston at stroke ends. At a maximum operating pressure of 0.9 MPa, it generates 2805 N of thrust, making it suitable for heavy material handling in battery production facilities.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC63X1000 Technical Specifications
| Model | Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC63X1000 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø63 mm |
| Stroke | 1000 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (approx.) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC63X1000
| SC | Standard tie-rod cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×1000 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC63X1000 Is Used
Battery Cell Stacking
Drives the extended vertical or horizontal stacking mechanisms for prismatic and pouch battery cells over a 1000 mm travel distance.
Module Transfer
Pushes battery modules along extended assembly conveyors, utilizing 2805 N of thrust at 0.9 MPa to move heavy packs.
Pack Handling
Actuates long-stroke loading and unloading arms for positioning large battery packs into testing or charging racks.
Is the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC63X1000 the Right Cylinder?
This 63 mm bore provides 1559 N at 0.5 MPa. If your battery stacking or handling application requires less force, stepping down to the 50 mm bore yields 982 N. For heavier pack manipulation, the 80 mm bore offers 2513 N. Always match the exact stroke, port thread, and mounting accessory when sourcing a replacement.
At a 1000 mm stroke, the 20 mm rod is highly susceptible to bending under side loads. For battery line automation involving long transfers, implement an external linear guide or use a guided cylinder to prevent rod bearing damage and premature wear.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC63X1000 FAQ
The B06- prefix indicates this is a battery-manufacturing dedicated variant of the SC63X1000. It is mechanically identical to the standard SC63X1000 cylinder, featuring the same 63 mm bore, 1000 mm stroke, and TPU seals.
At the maximum operating pressure of 0.9 MPa, this 63 mm bore cylinder generates a push thrust of 2805 N. At 0.5 MPa, it provides 1559 N of push force.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC63X1000
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.