Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC63X140S
The AirTAC B06-SC Battery-Dedicated Standard Cylinder B06-SC63X140S is a genuine double-acting standard air cylinder with a Ø63mm bore and 140mm stroke, PT1/4 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ63 mm
- Stroke140 mm
- Port sizePT1/4
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 28 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC63X140S
The B06-SC63X140S is a battery-manufacturing dedicated double-acting tie-rod cylinder. The B06- prefix designates this as AirTAC's specialized line for cell, module, and pack assembly, mechanically identical to the standard SC63X140S. It delivers a push force of 1559 N at 0.5 MPa and 2805 N at 0.9 MPa.
Featuring a 63mm bore and 140mm stroke, this unit includes a built-in magnet for CMSG/DMSG/EMSG sensor tracking. It uses a 20mm piston rod, a PT1/4 port, and has a body length A of 153mm. Adjustable cushions at both ends provide 28mm of deceleration to protect payloads during cycling.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC63X140S Technical Specifications
| Model | Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC63X140S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø63 mm |
| Stroke | 140 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (approx.) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC63X140S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×140 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC63X140S Is Used
Cell Stacking
Applies consistent pressure for aligning and stacking prismatic battery cells in module assembly.
Tab Welding
Positions battery tabs accurately for laser welding with reliable force control.
Pack Handling
Pushes and diverts battery packs along conveyor lines in automated production zones.
Is the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC63X140S the Right Cylinder?
This 63mm bore provides 1559 N at 0.5 MPa; step down to a 50mm bore for 982 N if lower force is needed, or up to an 80mm bore for 2513 N for heavier fixtures. For battery stacking and handling, verify side loads are minimized.
At 140mm stroke, side-load stress is moderate, but always ensure proper guiding for battery handling tools. For exact replacements, match the 63mm bore, 140mm stroke, PT1/4 port, basic mounting, and the -S magnet option.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC63X140S FAQ
The B06- prefix indicates this is a battery-manufacturing dedicated variant of the SC63X140S. It is mechanically identical to the standard model, offering the same 63mm bore, 140mm stroke, and 2805 N thrust at 0.9 MPa.
No, it is a double-acting cylinder and cannot hold position without live air pressure. The adjustable cushion only decelerates the piston at stroke ends; a mechanical lock or external brake is required for holding loads safely.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC63X140S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.