Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC63X150S
The AirTAC B06-SC Battery-Dedicated Standard Cylinder B06-SC63X150S is a genuine double-acting standard air cylinder with a Ø63mm bore and 150mm stroke, PT1/4 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ63 mm
- Stroke150 mm
- Port sizePT1/4
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 28 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC63X150S
The B06-SC63X150S is AirTAC's battery-manufacturing dedicated variant of the standard SC63X150S tie-rod cylinder. The B06- prefix designates its use in cell, module, and pack assembly lines without altering the core mechanics. As a double-acting pneumatic actuator, it delivers a push force of 1559 N at 0.5 MPa and 2805 N at 0.9 MPa.
Featuring a 63mm bore and 150mm stroke, this unit includes a built-in magnet (S suffix) for direct mounting of CMSG, DMSG, or EMSG sensors along the barrel. It uses a 20mm piston rod, PT1/4 ports, and has a body length A of 153mm, yielding an approximate extended length of 303mm.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC63X150S Technical Specifications
| Model | Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC63X150S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø63 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (approx.) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC63X150S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC63X150S Is Used
Cell Stacking
Provides the consistent 1559 N push force at 0.5 MPa required for aligning and compressing prismatic battery cells during stacking processes.
Tab Welding Press
Uses the built-in magnet for precise end-of-stroke position confirmation when clamping battery tabs prior to ultrasonic welding.
Module Handling
Actuates lifting and positioning mechanisms for battery modules on assembly conveyors, utilizing its 2805 N maximum thrust capacity.
Is the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC63X150S the Right Cylinder?
This 63mm bore provides substantial force for battery stacking and tabbing. If less force is needed, stepping down to a 50mm bore yields 982 N at 0.5 MPa; for heavier pack manipulation, an 80mm bore offers 2513 N at 0.5 MPa. The 150mm stroke is well within the 1500mm maximum standard stroke for this bore.
For replacement matching, ensure the new cylinder shares the 63mm bore, 150mm stroke, PT1/4 port thread, basic mounting style, and the built-in magnet. Although 150mm is a moderate stroke, always minimize side loads on the 20mm rod to prevent premature bearing wear.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC63X150S FAQ
The B06- prefix indicates this is an AirTAC battery-manufacturing dedicated cylinder. It is mechanically identical to the standard SC63X150S, featuring the same 63mm bore, 150mm stroke, built-in magnet, and 2805 N thrust at 0.9 MPa.
No, the SC series is double-acting and does not lock or hold position without live air pressure. The adjustable cushion only decelerates the piston near the stroke ends. A mechanical lock or external brake is required to hold a load safely.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC63X150S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.