Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC63X200S
The AirTAC B06-SC Battery-Dedicated Standard Cylinder B06-SC63X200S is a genuine double-acting standard air cylinder with a Ø63mm bore and 200mm stroke, PT1/4 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ63 mm
- Stroke200 mm
- Port sizePT1/4
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 28 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC63X200S
The B06-SC63X200S is a double-acting tie-rod pneumatic cylinder engineered for battery manufacturing lines. The B06- prefix designates this as a battery-industry dedicated variant of the standard SC63X200S, meaning it shares the exact same mechanical architecture without any proprietary alterations. Delivering a push force of 2182 N at 0.7 MPa, it is well-sized for cell stacking, module pressing, and pack assembly tasks.
This 63 mm bore unit features a 200 mm stroke and a 20 mm piston rod. The built-in S suffix magnet allows CMSG or DMSG sensors to clamp directly onto the barrel for precise end-of-stroke detection. It includes adjustable cushions (28 mm) to decelerate the piston smoothly, and its body length A is 153 mm.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC63X200S Technical Specifications
| Model | Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC63X200S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø63 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (approx.) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC63X200S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC63X200S Is Used
Cell Stacking Press
Applies consistent 2182 N force at 0.7 MPa to align and press battery cells during automated stacking processes.
Module Handling
Extends 200 mm to push or position battery modules on assembly conveyors with magnetic sensor confirmation.
Tab Welding Feed
Drives feeding mechanisms for tab welding equipment, utilizing adjustable cushions to prevent end-of-stroke impact.
Is the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC63X200S the Right Cylinder?
This 63 mm bore provides 2182 N of push force at 0.7 MPa. If your battery handling line requires less force, stepping down to a 50 mm bore yields 1374 N, while moving up to an 80 mm bore provides 3518 N for heavier pack manipulation. Because this model carries the S suffix, ensure your replacement matches the magnet option for sensor compatibility.
At a 200 mm stroke, side loads are moderate, but always verify that the external mechanism guides the load to prevent rod bearing wear. When ordering a replacement, match these five points: 63 mm bore, 200 mm stroke, PT port thread, basic mounting, and the built-in magnet.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC63X200S FAQ
The B06- prefix indicates this cylinder is part of AirTAC's battery-manufacturing dedicated line. The B06-SC63X200S is mechanically and dimensionally identical to the standard SC63X200S, featuring the same 63 mm bore, 200 mm stroke, and built-in magnet.
No, the SC series is double-acting and does not lock or hold a load without live air pressure. The adjustable cushion only decelerates the piston near the stroke end to reduce impact; a mechanical lock or external brake is required to hold a load safely.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC63X200S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.