Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC63X225
The AirTAC B06-SC Battery-Dedicated Standard Cylinder B06-SC63X225 is a genuine double-acting standard air cylinder with a Ø63mm bore and 225mm stroke, PT1/4 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ63 mm
- Stroke225 mm
- Port sizePT1/4
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 28 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC63X225
The B06-SC63X225 is an AirTAC double-acting tie-rod pneumatic cylinder engineered for battery-manufacturing lines. The B06- prefix designates this as a battery-industry dedicated variant of the standard SC63X225, meaning it shares the exact same mechanical specifications, including a 63mm bore, 225mm stroke, and PT1/4 port. It delivers a robust 2182N push force at 0.7 MPa, making it highly effective for cell stacking and module handling.
This model features a 20mm piston rod and adjustable cushions with a 28mm stroke length to decelerate loads smoothly at stroke ends. With a body length A of 153mm, the total extended length reaches approximately 378mm. The standard TPU seals support an operating temperature range of -20 to +70C, ensuring reliable performance across general automated assembly environments.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC63X225 Technical Specifications
| Model | Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC63X225 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø63 mm |
| Stroke | 225 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (approx.) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC63X225
| SC | Standard tie-rod cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×225 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC63X225 Is Used
Cell Stacking Assembly
Provides the consistent 2182N force at 0.7 MPa required to press and align battery cells tightly during module stacking operations.
Module Handling
Acts as a robust transfer actuator on conveyor lines, moving heavy battery modules between welding and packaging stations.
Tab Welding Positioning
Holds battery tabs firmly in place for automated laser welding, utilizing its 225mm stroke to reach into fixture pockets.
Is the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC63X225 the Right Cylinder?
Selecting this 63mm bore provides 1559N push force at 0.5 MPa; if your battery-handling mechanism requires less force, stepping down to a 50mm bore yields 982N at 0.5 MPa, while an 80mm bore upgrades the output to 2513N for heavier pack manipulation. To replace this unit, match the 63mm bore, 225mm stroke, PT1/4 port thread, basic mounting style, and the absence of a magnet.
Because this cylinder features a 225mm stroke, it is approaching a length where side-load management becomes critical. Long unsupported rods can bend under lateral stress, so for battery-tab alignment or heavy cell pressing, utilize an external guide rail or a guided cylinder to prevent rod-bearing damage and ensure precise movement.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC63X225 FAQ
The B06- prefix indicates this is a battery-manufacturing dedicated variant of the standard AirTAC SC63X225 cylinder. It is mechanically identical to the base SC model, offering the same 63mm bore, 225mm stroke, and 2182N push force at 0.7 MPa, but is designated for battery production line applications.
No, this is a double-acting pneumatic cylinder and does not lock or hold its position without live air pressure. If pressure is lost or the valve is centered, the load will drift or drop. A mechanical lock, external rod brake, or pilot-operated check valve is required to hold a load safely.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC63X225
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.