Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC63X25
The AirTAC B06-SC Battery-Dedicated Standard Cylinder B06-SC63X25 is a genuine double-acting standard air cylinder with a Ø63mm bore and 25mm stroke, PT1/4 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ63 mm
- Stroke25 mm
- Port sizePT1/4
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 28 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC63X25
The B06-SC63X25 is AirTAC's battery-manufacturing dedicated variant of the standard SC63X25 tie-rod cylinder. The B06- prefix designates its use in cell, module, and pack assembly lines, though mechanically it retains the exact physical specifications of the base model. This double-acting pneumatic cylinder provides a robust 1559 N of push force at 0.5 MPa, making it well-suited for high-cycle clamping and pressing tasks in battery production.
Designed with a compact 25 mm stroke and a body length A of 153 mm, it fits easily into tight automated machinery. The unit features a 20 mm rod diameter, PT1/4 porting, and 28 mm adjustable cushions to absorb end-of-stroke impact. As a genuine AirTAC component, it ensures reliable operation across your equipment.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC63X25 Technical Specifications
| Model | Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC63X25 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø63 mm |
| Stroke | 25 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (approx.) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC63X25
| SC | Standard tie-rod cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC63X25 Is Used
Battery Cell Stacking
Provides the precise 1559 N force and short 25 mm stroke needed to align and press prismatic battery cells tightly together during module assembly.
Tab Welding Clamp
Delivers consistent clamping pressure to hold battery tabs firmly in place for laser welding without damaging the delicate conductive foils.
Pack Handling Stopper
Acts as a short-stroke actuator to halt and position heavy battery packs on a conveyor line, utilizing its 28 mm cushion to prevent jarring impacts.
Is the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC63X25 the Right Cylinder?
This 63 mm bore cylinder offers 1559 N push and 1402 N pull at 0.5 MPa. If your battery stacking or handling application requires less force, stepping down to the 50 mm bore yields 982 N push. If you need more power for heavy pack manipulation, the 80 mm bore provides 2513 N. The short 25 mm stroke keeps the rod fully supported, minimizing side-load bending risks.
When replacing this unit, verify a 5-point match: 63 mm bore, 25 mm stroke, PT port thread, basic mounting (no bracket), and no built-in magnet. Note that the SC is a tie-rod cylinder and is shorter than ISO 15552 profiles, so it is not a direct dimensional replacement for ISO cylinders.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC63X25 FAQ
The B06- prefix indicates this is an AirTAC cylinder dedicated to battery-manufacturing applications. It is mechanically identical to the standard SC63X25, featuring the same 63 mm bore, 25 mm stroke, and 1559 N force at 0.5 MPa, but is designated for cell and pack assembly lines.
At the maximum operating pressure of 0.9 MPa, this double-acting cylinder generates a push thrust of 2805 N. At 0.5 MPa, it delivers 1559 N of push force and 1402 N of pull force.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC63X25
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.