Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC63X25S
The AirTAC B06-SC Battery-Dedicated Standard Cylinder B06-SC63X25S is a genuine double-acting standard air cylinder with a Ø63mm bore and 25mm stroke, PT1/4 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ63 mm
- Stroke25 mm
- Port sizePT1/4
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 28 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC63X25S
The B06-SC63X25S is an AirTAC double-acting tie-rod cylinder engineered for battery manufacturing lines. The B06- prefix designates this as a battery-industry dedicated variant of the SC63X25S, meaning it is mechanically identical to the standard model but intended for cell, module, and pack assembly applications. It delivers a robust 1559 N push force at 0.5 MPa, making it suitable for high-force clamping and stacking tasks.
This specific configuration features a short 25 mm stroke for compact, rapid actuation. The built-in S suffix magnet allows CMSG, DMSG, or EMSG sensors to clamp directly onto the barrel for precise end-of-stroke detection. With a 20 mm rod diameter, PT1/4 porting, and a 153 mm body length A, it provides reliable performance in tight automated cell-handling fixtures.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC63X25S Technical Specifications
| Model | Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC63X25S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø63 mm |
| Stroke | 25 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (approx.) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC63X25S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC63X25S Is Used
Battery Cell Stacking
Provides the 1559 N push force needed to align and compress battery cells tightly during automated stacking processes.
Module Tab Welding
The short 25 mm stroke and integrated magnet offer rapid, position-verified clamping for battery module tab welding fixtures.
Pack Handling Stops
Acts as a high-force stopper or diverter on conveyor lines moving heavy battery packs through assembly stations.
Is the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC63X25S the Right Cylinder?
Choose this 63 mm bore when your battery stacking or handling fixture requires 1559 N of push force at 0.5 MPa. If your application needs less force, stepping down to a 50 mm bore yields 982 N at 0.5 MPa. Conversely, if you need higher pressing forces, an 80 mm bore provides 2513 N at 0.5 MPa. Because the stroke is only 25 mm, rod bending and side-load risks are minimal, but always ensure axial load alignment to maximize seal life.
When replacing this unit, match these five points exactly: 63 mm bore, 25 mm stroke, PT1/4 port thread, basic mounting (no bracket), and the built-in magnet (-S). The SC series is a tie-rod design and is shorter than ISO 15552 cylinders, so it is not a direct dimensional replacement for ISO profiles.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC63X25S FAQ
The B06- prefix indicates this is an AirTAC battery-manufacturing dedicated cylinder. It is mechanically identical to the standard SC63X25S, featuring the same 63 mm bore, 25 mm stroke, and built-in magnet, but is designated for battery cell, module, and pack assembly lines.
No. The adjustable air cushion only decelerates the piston near the end of the stroke to soften impact. It does not lock or hold the load. If your battery assembly process requires position holding without live air pressure, you must use an external mechanical lock or pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC63X25S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.