Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC63X400
The AirTAC B06-SC Battery-Dedicated Standard Cylinder B06-SC63X400 is a genuine double-acting standard air cylinder with a Ø63mm bore and 400mm stroke, PT1/4 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ63 mm
- Stroke400 mm
- Port sizePT1/4
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 28 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC63X400
The B06-SC63X400 is an AirTAC battery-manufacturing dedicated cylinder, mechanically identical to the standard SC63X400. The B06- prefix simply designates its optimization for battery production lines, offering the same robust tie-rod construction without altering any physical specifications.
Delivering a push force of 1559 N at 0.5 MPa and 2805 N at 0.9 MPa, this double-acting actuator is built for substantial handling tasks. It features a 20 mm piston rod, PT1/4 ports, and 28 mm adjustable cushions to absorb impact at stroke ends.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC63X400 Technical Specifications
| Model | Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC63X400 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø63 mm |
| Stroke | 400 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (approx.) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC63X400
| SC | Standard tie-rod cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×400 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC63X400 Is Used
Battery Cell Stacking
Drives the precise vertical or horizontal stacking of prismatic battery cells into modules, utilizing its 400 mm stroke to handle multi-layer array spacing.
Module Transfer
Pushes heavy battery modules across conveyor lines between assembly stations, relying on 2182 N of thrust at 0.7 MPa to move the mass reliably.
Tab Welding Press
Acts as the primary actuator in automated tab welding fixtures, providing the stable clamping force needed to secure busbars during ultrasonic welding.
Is the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC63X400 the Right Cylinder?
This 63 mm bore provides a middle-ground force option; step down to a 50 mm bore (982 N at 0.5 MPa) for lighter duties, or up to an 80 mm bore (2513 N at 0.5 MPa) for heavier loads. For replacements, match the 63 mm bore, 400 mm stroke, PT thread, basic mounting, and no-magnet configuration exactly.
With a 400 mm stroke, the unsupported 20 mm rod is susceptible to bending under side loads. Use external guide rails or a guided cylinder to prevent rod bearing damage and ensure precise travel.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC63X400 FAQ
The B06- prefix indicates this is a battery-manufacturing dedicated variant of the SC63X400. It is mechanically and dimensionally identical to the standard SC cylinder, featuring the same 63 mm bore, 400 mm stroke, and 2805 N maximum thrust.
The SC series does not hold position without air pressure and the adjustable cushion only decelerates the piston, it does not lock it. For a 400 mm stroke, external guide rails must be used to support side loads and prevent the 20 mm rod from bending.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC63X400
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.