Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC63X400S
The AirTAC B06-SC Battery-Dedicated Standard Cylinder B06-SC63X400S is a genuine double-acting standard air cylinder with a Ø63mm bore and 400mm stroke, PT1/4 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ63 mm
- Stroke400 mm
- Port sizePT1/4
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 28 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC63X400S
The B06-SC63X400S is a double-acting tie-rod pneumatic cylinder engineered for battery-manufacturing environments. The "B06-" prefix designates this as AirTAC's battery-industry dedicated variant, meaning it is mechanically identical to the standard SC63X400S. It features a 63mm bore and a 400mm stroke, generating 2182N of push force at 0.5 MPa and up to 2805N at 0.9 MPa.
This unit includes a built-in magnet for position sensing and uses adjustable cushions with a 28mm length to decelerate the piston at stroke ends. With a body length A of 153mm, the total extended length reaches 553mm. It operates on filtered air between 0.15 and 1.0 MPa, making it a robust choice for cell and module assembly lines.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC63X400S Technical Specifications
| Model | Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC63X400S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø63 mm |
| Stroke | 400 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (approx.) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC63X400S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×400 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC63X400S Is Used
Battery Cell Stacking
Drives the precise vertical or horizontal stacking of lithium-ion battery cells during module assembly, utilizing the magnetic piston for end-of-stroke confirmation.
Module Handling
Pushes or positions heavy battery modules along conveyor lines, taking advantage of the 2805N maximum thrust to move payloads reliably.
Tab Welding Press
Applies consistent clamping force to hold battery tabs in place during ultrasonic or laser welding operations.
Is the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC63X400S the Right Cylinder?
This 63mm bore provides a strong middle-ground force output, stepping up from the 50mm bore (982N push at 0.5 MPa) without the physical bulk of the 80mm bore (2513N push at 0.5 MPa). Because the 400mm stroke creates a long unsupported rod extension, side loads can cause bending and premature rod-bearing wear. For battery stacking or handling tasks, use an external guide rail or a dedicated guided cylinder to absorb lateral forces.
When specifying a replacement, match these five points exactly: 63mm bore, 400mm stroke, PT1/4 port thread, basic mounting (no bracket), and the -S magnet option for sensor compatibility.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC63X400S FAQ
The B06- prefix indicates that this cylinder is part of AirTAC's battery-manufacturing dedicated line. It is mechanically and dimensionally identical to the standard SC63X400S, featuring the same 63mm bore, 400mm stroke, TPU seals, and magnet.
No, the SC series is a double-acting air cylinder and cannot hold position without live air pressure. The adjustable cushion only decelerates the piston at the end of the stroke; a mechanical lock or external pilot-operated check valve is required to hold vertical loads safely.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC63X400S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.