Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD100X100
The AirTAC Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD100X100 is a genuine double-acting DOUBLE-ROD air cylinder: the Ø25mm piston rod extends from BOTH end caps, giving equal effective area — and therefore equal force — in push and pull. Ø100mm bore, 100mm stroke, PT1/2 ports and adjustable end cushioning.
- BoreØ100 mm
- Rod (both ends)Ø25 mm
- Stroke100 mm
- Port sizePT1/2
- Rod configDouble rod (through)
- CushionAdjustable, 29 mm
About the Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD100X100
The B06-SCD100X100 is AirTAC's battery-manufacturing dedicated variant of the SCD100X100 double-rod cylinder, mechanically identical to the base model. The B06- prefix simply designates its optimization for cell, module, and pack assembly lines without altering any physical specifications.
Featuring a 100mm bore and 100mm stroke, this double-acting cylinder uses a Ø25mm piston rod passing through both end caps. This configuration yields identical thrust in both directions, generating 3681N of force at 0.5MPa and 6626N at 0.9MPa. It includes adjustable cushions (29mm length) and has a standard body length A(SCD) of 263mm.
Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD100X100 Technical Specifications
| Model | Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD100X100 |
|---|---|
| Series | SCD double-rod tie-rod cylinder |
| Bore size | Ø100 mm |
| Rod diameter | Ø25 mm (both ends) |
| Stroke | 100 mm |
| Rod configuration | Double rod — rod through both caps |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SCD (double-rod) datasheet. Because the rod runs through both caps, the effective area is (bore² − rod²) in both directions. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm, double rod)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | 5154 N |
| Max (@1.0 MPa) | 751 kgf | |
Push and pull are EQUAL on a double-rod cylinder — both chambers lose the rod area, so effective area = (bore² − rod²) each way. Actual usable force is lower than theoretical due to friction and back-pressure; size with a safety margin.
Model Code: Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD100X100
| SCD | Double-rod tie-rod cylinder series (rod out both ends). |
|---|---|
| 100 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related types: SC (single rod), SCJ (adjustable stroke), SCT (multi-position). SCD mounting: Basic, FA, LB, TC, TCM1. Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD100X100 Is Used
Battery Cell Stacking
Provides equal push and pull force for aligning and stacking prismatic battery cells with high repeatability.
Module Shuttle Transfer
The through-rod design allows mounting tooling on both ends to shuttle battery modules between assembly stations symmetrically.
Non-Rotating Tab Welding
Dual-rod guidance improves anti-rotation characteristics for pressing battery tabs during ultrasonic welding operations.
Is the Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD100X100 the Right Cylinder?
Choose this 100mm bore when an application demands 3681N of symmetrical force each way, such as driving dual tooling or a non-rotating pusher. If your battery line requires less force, stepping down to an 80mm bore provides 2268N at 0.5MPa; if you only need unidirectional thrust, a single-rod SC100X100 avoids the rear rod protrusion.
For replacements, match the 100mm bore, 100mm stroke, PT1/2 port thread, basic mounting, and magnet option exactly. Because the stroke is 100mm, side-load on the rod is minimal, but always verify external guiding if carrying heavy battery trays.
Double-rod checklist
- ✓ Need equal force / speed both directions?
- ✓ Rear rod for tooling, stopper or sensor flag?
- ✓ Better rod guidance / anti-rotation?
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Keep BOTH rod ends clear of side load and interference.
- check Adjust end cushion screws for smooth stops.
- check Use SCD mounting accessory (FA / LB / TC / TCM1).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD100X100 FAQ
The B06- prefix indicates this is AirTAC's battery-manufacturing dedicated line. It is mechanically identical to the standard SCD100X100, meaning the bore, stroke, ports, and seals remain exactly the same.
A double-rod cylinder provides identical push and pull force (3681N at 0.5MPa for this bore) because the rod area is subtracted on both sides. It also offers better rod guidance and allows tooling or sensors to be mounted on the rear rod.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SCD Double-Rod Cylinders
Request a Quote for Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD100X100
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.