Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD100X100S
The AirTAC Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD100X100S is a genuine double-acting DOUBLE-ROD air cylinder: the Ø25mm piston rod extends from BOTH end caps, giving equal effective area — and therefore equal force — in push and pull. Ø100mm bore, 100mm stroke, PT1/2 ports and adjustable end cushioning.
- BoreØ100 mm
- Rod (both ends)Ø25 mm
- Stroke100 mm
- Port sizePT1/2
- Rod configDouble rod (through)
- CushionAdjustable, 29 mm
About the Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD100X100S
The B06-SCD100X100S is an AirTAC double-acting, double-rod cylinder engineered for battery-manufacturing lines. The B06- prefix designates this as a battery-dedicated variant of the standard SCD100X100S, meaning it shares the exact same physical specifications while being tailored for cell, module, and pack assembly applications. Because the piston rod passes through both end caps, the effective area is identical in both chambers, yielding an equal push and pull force of 3681 N at 0.5 MPa.
This 100 mm bore unit features a 100 mm stroke and a built-in magnetic ring (indicated by the S suffix), allowing CMSG, DMSG, or EMSG sensors to clamp directly onto the barrel for precise position detection. The Ø25 mm rod protrudes from both ends, providing dual tooling mounting points and enhanced anti-rotation characteristics. With a body length A(SCD) of 263 mm and 29 mm adjustable cushions at each end, it safely decelerates heavy battery-handling fixtures without relying on air pressure to hold the load.
Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD100X100S Technical Specifications
| Model | Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD100X100S |
|---|---|
| Series | SCD double-rod tie-rod cylinder |
| Bore size | Ø100 mm |
| Rod diameter | Ø25 mm (both ends) |
| Stroke | 100 mm |
| Rod configuration | Double rod — rod through both caps |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SCD (double-rod) datasheet. Because the rod runs through both caps, the effective area is (bore² − rod²) in both directions. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm, double rod)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | 5154 N |
| Max (@1.0 MPa) | 751 kgf | |
Push and pull are EQUAL on a double-rod cylinder — both chambers lose the rod area, so effective area = (bore² − rod²) each way. Actual usable force is lower than theoretical due to friction and back-pressure; size with a safety margin.
Model Code: Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD100X100S
| SCD | Double-rod tie-rod cylinder series (rod out both ends). |
|---|---|
| 100 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related types: SC (single rod), SCJ (adjustable stroke), SCT (multi-position). SCD mounting: Basic, FA, LB, TC, TCM1. Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD100X100S Is Used
Battery Cell Stacking
Provides equal force and non-rotating dual rods to press and align battery cells precisely during module stacking operations.
Shuttle Transfer Tables
Drives symmetrical shuttle mechanisms in pack assembly lines, utilizing the identical push and pull speed for consistent cycle times.
Tab Welding Fixtures
Holds battery tabs securely from both ends using rear-mounted tooling, while the built-in magnet confirms clamp position for the welder.
Is the Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD100X100S the Right Cylinder?
Choose this 100 mm bore when your battery assembly process requires substantial equal bidirectional thrust (3681 N at 0.5 MPa, or 6626 N at 0.9 MPa). If your application only needs one-sided actuation, the single-rod AirTAC SC100X100S is a lighter, more compact alternative. Conversely, if your fixture imposes severe side loads, a dedicated guided cylinder is superior to relying solely on the through-rod for anti-rotation. To replace this unit, match the 100 mm bore, 100 mm stroke, PT1/2 port thread, basic mounting, and the -S magnet option.
Double-rod checklist
- ✓ Need equal force / speed both directions?
- ✓ Rear rod for tooling, stopper or sensor flag?
- ✓ Better rod guidance / anti-rotation?
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Keep BOTH rod ends clear of side load and interference.
- check Adjust end cushion screws for smooth stops.
- check Use SCD mounting accessory (FA / LB / TC / TCM1).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD100X100S FAQ
The B06- prefix indicates this is a battery-manufacturing dedicated variant of the SCD100X100S. It is mechanically identical to the standard model, featuring the same 100 mm bore, 100 mm stroke, and 3681 N equal push/pull force at 0.5 MPa, but is designated for battery industry applications.
Yes, because the rod occupies volume on both sides of the piston, the push and pull forces are identical. This cylinder generates 3681 N in both directions at 0.5 MPa and 6626 N at 0.9 MPa. Note that the adjustable cushions only decelerate the piston at stroke ends; a mechanical lock is required to hold a load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SCD Double-Rod Cylinders
Request a Quote for Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD100X100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.