Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD100X250
The AirTAC Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD100X250 is a genuine double-acting DOUBLE-ROD air cylinder: the Ø25mm piston rod extends from BOTH end caps, giving equal effective area — and therefore equal force — in push and pull. Ø100mm bore, 250mm stroke, PT1/2 ports and adjustable end cushioning.
- BoreØ100 mm
- Rod (both ends)Ø25 mm
- Stroke250 mm
- Port sizePT1/2
- Rod configDouble rod (through)
- CushionAdjustable, 29 mm
About the Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD100X250
The B06-SCD100X250 is an AirTAC double-acting, double-rod cylinder where the B06- prefix designates it as a battery-manufacturing dedicated variant of the standard SCD100X250, sharing identical mechanical specifications. Because the Ø25 mm piston rod passes through both end caps, the effective area is identical in both directions, yielding an equal push and pull force of 3681 N at 0.5 MPa and a robust 6626 N at 0.9 MPa.
This 100 mm bore, 250 mm stroke configuration is tailored for cell stacking and module handling where symmetric loading is crucial. The cylinder features a 29 mm adjustable cushion at stroke ends to decelerate heavy tooling smoothly, and its body length A(SCD) is 263 mm. Note that the adjustable cushion only slows the piston near end-of-travel; it does not lock or hold the load if air pressure is lost.
Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD100X250 Technical Specifications
| Model | Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD100X250 |
|---|---|
| Series | SCD double-rod tie-rod cylinder |
| Bore size | Ø100 mm |
| Rod diameter | Ø25 mm (both ends) |
| Stroke | 250 mm |
| Rod configuration | Double rod — rod through both caps |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SCD (double-rod) datasheet. Because the rod runs through both caps, the effective area is (bore² − rod²) in both directions. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm, double rod)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | 5154 N |
| Max (@1.0 MPa) | 751 kgf | |
Push and pull are EQUAL on a double-rod cylinder — both chambers lose the rod area, so effective area = (bore² − rod²) each way. Actual usable force is lower than theoretical due to friction and back-pressure; size with a safety margin.
Model Code: Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD100X250
| SCD | Double-rod tie-rod cylinder series (rod out both ends). |
|---|---|
| 100 | Bore size in mm. |
| ×250 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related types: SC (single rod), SCJ (adjustable stroke), SCT (multi-position). SCD mounting: Basic, FA, LB, TC, TCM1. Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD100X250 Is Used
Cell Stacking Press
Provides equal 3681 N clamping and retraction force to align and press battery cells precisely without rotational drift during stacking.
Module Shuttle Transfer
Uses the dual through-rods to mount opposing tooling for moving battery modules between assembly stations symmetrically.
Tab Welding Clamp
Delivers consistent 6626 N thrust at 0.9 MPa for holding battery tabs firmly during laser welding, with rear-rod sensing capability.
Is the Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD100X250 the Right Cylinder?
Select this 100 mm bore when your battery assembly line needs substantial equal-thrust in both directions (3681 N at 0.5 MPa). If your application requires less force, stepping down to an 80 mm bore provides 2268 N at 0.5 MPa. Conversely, if you need higher throughput force, the 125 mm bore offers 5734 N. For simpler one-way actuation where rear tooling is unnecessary, a single-rod SC cylinder is more compact.
At 250 mm stroke, the unsupported rod length is moderate, but for heavy side loads common in pack handling, an external guide or a fully guided cylinder is recommended to prevent rod bending. To replace this unit, match the 100 mm bore, 250 mm stroke, PT1/2 port thread, basic mounting, and ensure no magnet is required. SCD mounting accessories are limited to FA, LB, TC, and TCM1.
Double-rod checklist
- ✓ Need equal force / speed both directions?
- ✓ Rear rod for tooling, stopper or sensor flag?
- ✓ Better rod guidance / anti-rotation?
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Keep BOTH rod ends clear of side load and interference.
- check Adjust end cushion screws for smooth stops.
- check Use SCD mounting accessory (FA / LB / TC / TCM1).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD100X250 FAQ
The B06- prefix indicates this is a battery-manufacturing dedicated variant of the SCD100X250. It is mechanically identical to the standard model, featuring the same 100 mm bore, 250 mm stroke, and PT1/2 port, simply designated for battery industry applications.
A double-rod cylinder provides identical push and pull force (3681 N at 0.5 MPa here) because the rod area is subtracted on both sides. It offers better anti-rotation, symmetric bearing load, and a rear rod for mounting secondary tooling or sensors, which is ideal for precision battery assembly.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SCD Double-Rod Cylinders
Request a Quote for Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD100X250
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.