Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD100X700S
The AirTAC Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD100X700S is a genuine double-acting DOUBLE-ROD air cylinder: the Ø25mm piston rod extends from BOTH end caps, giving equal effective area — and therefore equal force — in push and pull. Ø100mm bore, 700mm stroke, PT1/2 ports and adjustable end cushioning.
- BoreØ100 mm
- Rod (both ends)Ø25 mm
- Stroke700 mm
- Port sizePT1/2
- Rod configDouble rod (through)
- CushionAdjustable, 29 mm
About the Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD100X700S
The B06-SCD100X700S is an AirTAC double-acting, double-rod cylinder engineered for battery-manufacturing lines. The B06- prefix marks this as a battery-dedicated variant of the SCD100X700S, meaning it is mechanically identical to the standard model but designated for cell, module, and pack assembly operations. With a 100mm bore and 700mm stroke, it yields an identical push and pull force of 3681N at 0.5 MPa, rising to a 6626N thrust at 0.9 MPa.
A Ø25mm piston rod passes through both end caps, providing equal thrust and speed in both directions while improving bearing load distribution. The barrel includes a built-in magnetic ring (indicated by the S suffix), allowing CMSG, DMSG, or EMSG sensors to track piston position along its 700mm travel. Adjustable cushions at both ends provide 29mm of deceleration to protect tooling at stroke limits.
Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD100X700S Technical Specifications
| Model | Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD100X700S |
|---|---|
| Series | SCD double-rod tie-rod cylinder |
| Bore size | Ø100 mm |
| Rod diameter | Ø25 mm (both ends) |
| Stroke | 700 mm |
| Rod configuration | Double rod — rod through both caps |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SCD (double-rod) datasheet. Because the rod runs through both caps, the effective area is (bore² − rod²) in both directions. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm, double rod)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | 5154 N |
| Max (@1.0 MPa) | 751 kgf | |
Push and pull are EQUAL on a double-rod cylinder — both chambers lose the rod area, so effective area = (bore² − rod²) each way. Actual usable force is lower than theoretical due to friction and back-pressure; size with a safety margin.
Model Code: Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD100X700S
| SCD | Double-rod tie-rod cylinder series (rod out both ends). |
|---|---|
| 100 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related types: SC (single rod), SCJ (adjustable stroke), SCT (multi-position). SCD mounting: Basic, FA, LB, TC, TCM1. Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD100X700S Is Used
Battery Cell Stacking
Drives dual-sided pressing or alignment plates in prismatic cell stacking modules, utilizing the equal push and pull force to maintain consistent pressure during electrode layering.
Pack Shuttle Transfer
Moves battery packs between assembly stations using tooling mounted to both rod ends, allowing synchronized part pushing and pulling without reversing the actuator body.
Tab Welding Clamp
Applies 3681N of clamping force at 0.5 MPa to hold battery tabs firmly during laser welding, with the built-in magnet confirming clamp position to the PLC.
Is the Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD100X700S the Right Cylinder?
Choose this 100mm bore when an application requires substantial equal-force bidirectional actuation, delivering 3681N each way at 0.5 MPa. If less force is needed, stepping down to an 80mm bore yields 2268N. If the rear protruding rod is unnecessary and only single-direction thrust is required, a standard AirTAC SC single-rod cylinder provides a full-bore push without the added length and mass of a through-rod.
At a 700mm stroke, the unsupported rod length is significant; heavy side loads will induce bending moments on the rod and bearings. For battery stacking or handling heavy trays, pair this cylinder with an external linear guide or select a guided cylinder to prevent rod deflection. Replacement requires an exact match: 100mm bore, 700mm stroke, PT port thread, basic mounting, and a magnetic piston.
Double-rod checklist
- ✓ Need equal force / speed both directions?
- ✓ Rear rod for tooling, stopper or sensor flag?
- ✓ Better rod guidance / anti-rotation?
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Keep BOTH rod ends clear of side load and interference.
- check Adjust end cushion screws for smooth stops.
- check Use SCD mounting accessory (FA / LB / TC / TCM1).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD100X700S FAQ
The B06- prefix indicates this is an AirTAC battery-manufacturing dedicated cylinder. The B06-SCD100X700S is mechanically and dimensionally identical to the standard SCD100X700S, sharing the same 100mm bore, 700mm stroke, and 3681N equal push/pull force at 0.5 MPa.
Yes, because the rod occupies volume on both sides of the piston, the effective area is identical in both directions. The push and pull forces are exactly equal, providing 3681N at 0.5 MPa and 6626N at 0.9 MPa. Note that air pressure must be maintained to hold a load; the cushions only decelerate the piston and do not act as a brake.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SCD Double-Rod Cylinders
Request a Quote for Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD100X700S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.