Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD40X175S
The AirTAC B06-SCD Battery-Specific Standard Cylinder B06-SCD40X175S is a genuine double-acting DOUBLE-ROD air cylinder: the Ø16mm piston rod extends from BOTH end caps, giving equal effective area — and therefore equal force — in push and pull. Ø40mm bore, 175mm stroke, PT1/4 ports and adjustable end cushioning.
- BoreØ40 mm
- Rod (both ends)Ø16 mm
- Stroke175 mm
- Port sizePT1/4
- Rod configDouble rod (through)
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD40X175S
The B06-SCD40X175S is an AirTAC double-acting, double-rod cylinder where the B06- prefix designates it as a battery-manufacturing dedicated variant of the standard SCD40X175S; mechanically, the specs are identical. Because the Ø16 piston rod passes through both end caps, the effective area is balanced, yielding an identical 528 N of thrust in both directions at 0.5 MPa (739 N at 0.7 MPa).
This 40 mm bore unit features a 175 mm stroke and includes a built-in magnetic piston (-S) for tracking position along the battery assembly line. The cylinder body length A(SCD) is 191 mm, and it comes with adjustable cushions providing 21 mm of end-of-stroke deceleration to protect tooling during rapid cycling.
Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD40X175S Technical Specifications
| Model | Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD40X175S |
|---|---|
| Series | SCD double-rod tie-rod cylinder |
| Bore size | Ø40 mm |
| Rod diameter | Ø16 mm (both ends) |
| Stroke | 175 mm |
| Rod configuration | Double rod — rod through both caps |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SCD (double-rod) datasheet. Because the rod runs through both caps, the effective area is (bore² − rod²) in both directions. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø40mm, double rod)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | 739 N |
| Max (@1.0 MPa) | 108 kgf | |
Push and pull are EQUAL on a double-rod cylinder — both chambers lose the rod area, so effective area = (bore² − rod²) each way. Actual usable force is lower than theoretical due to friction and back-pressure; size with a safety margin.
Model Code: Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD40X175S
| SCD | Double-rod tie-rod cylinder series (rod out both ends). |
|---|---|
| 40 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related types: SC (single rod), SCJ (adjustable stroke), SCT (multi-position). SCD mounting: Basic, FA, LB, TC, TCM1. Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD40X175S Is Used
Battery Cell Stacking
Equal push and pull thrust ensures consistent pressure when stacking and compressing battery cells during module assembly.
Dual-Sided Transfer
The through-rod design allows tooling attachment on both ends, enabling synchronized part shuttling on conveyor lines.
Position Verification
The built-in magnet allows CMSG or DMSG sensors to detect exact stroke endpoints for tab welding and handling processes.
Is the Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD40X175S the Right Cylinder?
Select this 40 mm bore when a battery-handling mechanism requires equal push and pull forces along with a rear rod for mounting a stopper or sensor flag. If your module stacking process needs less force, stepping down to a 32 mm bore provides 345 N at 0.5 MPa. For heavier pack manipulation, a 50 mm bore offers 825 N. If the application only needs one-sided actuation, a single-rod AirTAC SC cylinder is a lighter, more compact choice.
When replacing this unit, match the 40 mm bore, 175 mm stroke, PT1/4 port thread, basic mounting style, and the -S magnetic piston. For a 175 mm stroke, ensure the load is guided externally; the long unsupported rod can bend under heavy side loads, so a dedicated guided cylinder is recommended if precise linear motion is required without external rails.
Double-rod checklist
- ✓ Need equal force / speed both directions?
- ✓ Rear rod for tooling, stopper or sensor flag?
- ✓ Better rod guidance / anti-rotation?
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Keep BOTH rod ends clear of side load and interference.
- check Adjust end cushion screws for smooth stops.
- check Use SCD mounting accessory (FA / LB / TC / TCM1).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD40X175S FAQ
The B06- prefix indicates this cylinder is part of AirTAC's battery-manufacturing dedicated line. The B06-SCD40X175S is mechanically identical to the standard SCD40X175S, offering the same 40 mm bore, 175 mm stroke, and double-rod configuration.
Yes, it equalizes it. Because the rod occupies space on both sides of the piston, the push and pull forces are identical. This model outputs 739 N of force in both directions at 0.7 MPa.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SCD Double-Rod Cylinders
Request a Quote for Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD40X175S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.