Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD63X200
The AirTAC Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD63X200 is a genuine double-acting DOUBLE-ROD air cylinder: the Ø20mm piston rod extends from BOTH end caps, giving equal effective area — and therefore equal force — in push and pull. Ø63mm bore, 200mm stroke, PT1/4 ports and adjustable end cushioning.
- BoreØ63 mm
- Rod (both ends)Ø20 mm
- Stroke200 mm
- Port sizePT1/4
- Rod configDouble rod (through)
- CushionAdjustable, 28 mm
About the Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD63X200
The B06-SCD63X200 is an AirTAC double-acting, double-rod cylinder where the B06- prefix designates it as a battery-manufacturing dedicated variant of the standard SCD63X200. Mechanically, it shares the exact same physical specifications, delivering an equal push and pull force of 1402 N at 0.5 MPa. The through-rod design uses a 20 mm diameter rod on both ends, ensuring symmetric bearing loading and superior anti-rotation characteristics.
With a 200 mm stroke, this unit features adjustable cushions with a 21 mm length to decelerate the piston smoothly at stroke ends. The retracted body length A(SCD) is 210 mm. Operating pressure ranges from 0.15 to 1.0 MPa, and the standard TPU seals support temperatures from -20 to +70 C. Note that air pressure must be maintained to hold a load; a mechanical lock is required if position holding without live pressure is needed.
Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD63X200 Technical Specifications
| Model | Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD63X200 |
|---|---|
| Series | SCD double-rod tie-rod cylinder |
| Bore size | Ø63 mm |
| Rod diameter | Ø20 mm (both ends) |
| Stroke | 200 mm |
| Rod configuration | Double rod — rod through both caps |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SCD (double-rod) datasheet. Because the rod runs through both caps, the effective area is (bore² − rod²) in both directions. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø63mm, double rod)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | 1962 N |
| Max (@1.0 MPa) | 286 kgf | |
Push and pull are EQUAL on a double-rod cylinder — both chambers lose the rod area, so effective area = (bore² − rod²) each way. Actual usable force is lower than theoretical due to friction and back-pressure; size with a safety margin.
Model Code: Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD63X200
| SCD | Double-rod tie-rod cylinder series (rod out both ends). |
|---|---|
| 63 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related types: SC (single rod), SCJ (adjustable stroke), SCT (multi-position). SCD mounting: Basic, FA, LB, TC, TCM1. Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD63X200 Is Used
Cell Stacking Press
Applies equal 1402 N clamping force in both directions to align and press battery cell layers without rotational drift.
Module Shuttle Transfer
Uses the dual-rod symmetry to shuttle battery modules between assembly stations with stable, non-rotating tooling on both ends.
Tab Welding Clamp
Provides a rigid 20 mm through-rod platform on both sides for mounting welding heads and rear sensor flags.
Is the Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD63X200 the Right Cylinder?
This 63 mm bore size provides a solid 1402 N output each way at 0.5 MPa, making it ideal for medium-duty battery cell stacking and tab welding. If your assembly station requires less force, stepping down to the 50 mm bore yields 825 N at 0.5 MPa. Conversely, heavier pack manipulation might need the 80 mm bore at 2268 N. If your application only needs one-sided actuation, a single-rod SC cylinder saves space.
For replacement, match the 63 mm bore, 200 mm stroke, PT1/4 port thread, basic mounting, and non-magnet configuration exactly. At 200 mm stroke, side load is moderate, but for longer 300 mm+ extensions, an external guide or fully guided cylinder is strongly recommended to prevent rod bending. Genuine AirTAC reliability ensures consistent automated production.
Double-rod checklist
- ✓ Need equal force / speed both directions?
- ✓ Rear rod for tooling, stopper or sensor flag?
- ✓ Better rod guidance / anti-rotation?
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Keep BOTH rod ends clear of side load and interference.
- check Adjust end cushion screws for smooth stops.
- check Use SCD mounting accessory (FA / LB / TC / TCM1).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD63X200 FAQ
The B06- prefix indicates this is a battery-manufacturing dedicated variant of the SCD63X200. It is mechanically identical to the base model, offering the same 1402 N equal push/pull force, 20 mm rod, and PT1/4 port, simply designated for battery industry production lines.
The double-rod design provides identical 1402 N thrust in both directions and allows tooling or sensors to be mounted on the rear rod. It offers better anti-rotation resistance and symmetric bearing loading compared to a single-rod SC cylinder, though it is not a substitute for a guided cylinder under heavy side loads.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SCD Double-Rod Cylinders
Request a Quote for Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD63X200
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.