Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD80X200S
The AirTAC Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD80X200S is a genuine double-acting DOUBLE-ROD air cylinder: the Ø25mm piston rod extends from BOTH end caps, giving equal effective area — and therefore equal force — in push and pull. Ø80mm bore, 200mm stroke, PT3/8 ports and adjustable end cushioning.
- BoreØ80 mm
- Rod (both ends)Ø25 mm
- Stroke200 mm
- Port sizePT3/8
- Rod configDouble rod (through)
- CushionAdjustable, 28 mm
About the Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD80X200S
The B06-SCD80X200S is an AirTAC double-acting, double-rod cylinder engineered for battery-manufacturing lines. The B06- prefix marks this as a battery-dedicated variant of the standard SCD80X200S, meaning it is mechanically identical to the base model. It features a 80mm bore, 200mm stroke, and a built-in magnet for position sensing.
Because the piston rod passes through both end caps, the effective area is identical in both chambers. This yields equal thrust in both directions, delivering 2268 N at 0.5 MPa and 4082 N at 0.9 MPa. The Ø25mm rods protrude from both ends, providing dual tooling mounting points and enhanced anti-rotation stability for cell handling.
Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD80X200S Technical Specifications
| Model | Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD80X200S |
|---|---|
| Series | SCD double-rod tie-rod cylinder |
| Bore size | Ø80 mm |
| Rod diameter | Ø25 mm (both ends) |
| Stroke | 200 mm |
| Rod configuration | Double rod — rod through both caps |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SCD (double-rod) datasheet. Because the rod runs through both caps, the effective area is (bore² − rod²) in both directions. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm, double rod)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | 3175 N |
| Max (@1.0 MPa) | 463 kgf | |
Push and pull are EQUAL on a double-rod cylinder — both chambers lose the rod area, so effective area = (bore² − rod²) each way. Actual usable force is lower than theoretical due to friction and back-pressure; size with a safety margin.
Model Code: Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD80X200S
| SCD | Double-rod tie-rod cylinder series (rod out both ends). |
|---|---|
| 80 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related types: SC (single rod), SCJ (adjustable stroke), SCT (multi-position). SCD mounting: Basic, FA, LB, TC, TCM1. Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD80X200S Is Used
Cell Stacking Press
Provides equal 2268 N clamping and retraction force to align and press battery cells without shifting during module assembly.
Shuttle Transfer
Uses both rod ends to push and pull a conveyor cart between welding stations, ensuring balanced momentum and stable kinetics.
Tab Welding Clamp
The rear rod carries a sensor flag for precise end-of-stroke confirmation while the front rod holds the welding electrode.
Is the Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD80X200S the Right Cylinder?
Choose this 80mm bore when your battery stacking or handling station requires symmetric force and cannot tolerate rod rotation. If your application needs less force, stepping down to a 63mm bore yields 1402 N at 0.5 MPa. If you only need one-sided actuation, a standard single-rod AirTAC SC cylinder is lighter and more compact.
For replacement, match the 80mm bore, 200mm stroke, PT3/8 port thread, basic mounting, and the -S magnet option. The 200mm stroke creates an unsupported length; under heavy side loads, use an external guide rail or a dedicated guided cylinder to prevent rod bending.
Double-rod checklist
- ✓ Need equal force / speed both directions?
- ✓ Rear rod for tooling, stopper or sensor flag?
- ✓ Better rod guidance / anti-rotation?
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Keep BOTH rod ends clear of side load and interference.
- check Adjust end cushion screws for smooth stops.
- check Use SCD mounting accessory (FA / LB / TC / TCM1).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD80X200S FAQ
The B06- prefix indicates this is an AirTAC battery-manufacturing dedicated cylinder. It is mechanically identical to the standard SCD80X200S, offering the same 80mm bore, 200mm stroke, and 2268 N equal push/pull force at 0.5 MPa.
No. The adjustable cushion only decelerates the piston near the stroke end. If air pressure is lost, the cylinder will drift. To hold a load securely without live pressure, you must use an external rod brake or a pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SCD Double-Rod Cylinders
Request a Quote for Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD80X200S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.