Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD80X800
The AirTAC Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD80X800 is a genuine double-acting DOUBLE-ROD air cylinder: the Ø25mm piston rod extends from BOTH end caps, giving equal effective area — and therefore equal force — in push and pull. Ø80mm bore, 800mm stroke, PT3/8 ports and adjustable end cushioning.
- BoreØ80 mm
- Rod (both ends)Ø25 mm
- Stroke800 mm
- Port sizePT3/8
- Rod configDouble rod (through)
- CushionAdjustable, 28 mm
About the Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD80X800
The B06-SCD80X800 is an AirTAC double-acting, double-rod cylinder where the B06- prefix designates it as a battery-manufacturing dedicated variant of the standard SCD80X800. Mechanically identical to the base model, it features a 25mm diameter rod protruding from both end caps. This through-rod design yields identical push and pull thrust of 2268N at 0.5 MPa, peaking at 4082N when operating at 0.9 MPa. The symmetric layout provides superior rod guidance and natural anti-rotation properties compared to single-rod units.
Equipped with a PT3/8 port and adjustable cushions delivering 28mm of end-of-stroke deceleration, this 800mm stroke unit handles long-trroke transfer tasks on cell and module assembly lines. The body length A(SCD) is 257mm. It uses a standard TPU seal rated for -20 to +70 C. Note that the adjustable cushion only decelerates the piston; it does not lock or hold the load if air pressure is lost, so an external mechanical lock is required for vertical holding.
Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD80X800 Technical Specifications
| Model | Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD80X800 |
|---|---|
| Series | SCD double-rod tie-rod cylinder |
| Bore size | Ø80 mm |
| Rod diameter | Ø25 mm (both ends) |
| Stroke | 800 mm |
| Rod configuration | Double rod — rod through both caps |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SCD (double-rod) datasheet. Because the rod runs through both caps, the effective area is (bore² − rod²) in both directions. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm, double rod)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | 3175 N |
| Max (@1.0 MPa) | 463 kgf | |
Push and pull are EQUAL on a double-rod cylinder — both chambers lose the rod area, so effective area = (bore² − rod²) each way. Actual usable force is lower than theoretical due to friction and back-pressure; size with a safety margin.
Model Code: Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD80X800
| SCD | Double-rod tie-rod cylinder series (rod out both ends). |
|---|---|
| 80 | Bore size in mm. |
| ×800 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related types: SC (single rod), SCJ (adjustable stroke), SCT (multi-position). SCD mounting: Basic, FA, LB, TC, TCM1. Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD80X800 Is Used
Battery Module Transfer
Ideal for shifting heavy battery modules along assembly conveyors, using the dual rods to carry opposing tooling or synchronized stops without rotational play.
Cell Shuttle Mechanism
Provides perfectly symmetric movement for shuttling battery cells between processing stations, ensuring identical speed and force during extension and retraction.
Tab Welding Press
Drives welding heads with balanced pressure on both strokes, while the rear rod extension can mount a flag for external position confirmation.
Is the Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD80X800 the Right Cylinder?
Choose this 80mm bore when your battery handling system requires substantial equal bidirectional force (2268N at 0.5 MPa) across a long 800mm stroke. If your application needs less thrust, stepping down to a 63mm bore provides 1402N at 0.5 MPa. If you only need one-way actuation and can tolerate unequal return force, a standard single-rod AirTAC SC cylinder is a lighter, more compact choice. For heavy side loads, do not rely on the through rod alone; substitute a dedicated guided cylinder to prevent rod bending.
At 800mm of stroke, the unsupported rod length is significant. To manage rod bending and bearing wear, mount an external guide rail or use a guided cylinder. To replace this unit, match the 80mm bore, 800mm stroke, PT3/8 port thread, basic mounting, and confirm whether a magnetic piston (-S) is needed.
Double-rod checklist
- ✓ Need equal force / speed both directions?
- ✓ Rear rod for tooling, stopper or sensor flag?
- ✓ Better rod guidance / anti-rotation?
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Keep BOTH rod ends clear of side load and interference.
- check Adjust end cushion screws for smooth stops.
- check Use SCD mounting accessory (FA / LB / TC / TCM1).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD80X800 FAQ
The B06- prefix indicates this is an AirTAC battery-manufacturing dedicated cylinder. It is mechanically identical to the standard SCD80X800, offering the same 80mm bore, 800mm stroke, and 2268N equal push/pull force at 0.5 MPa, simply designated for battery industry applications.
A double-rod SCD cylinder provides equal force and speed in both directions because the 25mm rod area is subtracted from both chambers. It also offers better anti-rotation characteristics and allows tooling or sensors to be mounted on the rear rod, which a single-rod SC cylinder cannot do.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SCD Double-Rod Cylinders
Request a Quote for Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD80X800
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.