Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD80X900
The AirTAC Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD80X900 is a genuine double-acting DOUBLE-ROD air cylinder: the Ø25mm piston rod extends from BOTH end caps, giving equal effective area — and therefore equal force — in push and pull. Ø80mm bore, 900mm stroke, PT3/8 ports and adjustable end cushioning.
- BoreØ80 mm
- Rod (both ends)Ø25 mm
- Stroke900 mm
- Port sizePT3/8
- Rod configDouble rod (through)
- CushionAdjustable, 28 mm
About the Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD80X900
The B06-SCD80X900 is an AirTAC double-acting, double-rod cylinder where the B06- prefix designates it as a battery-manufacturing dedicated variant, mechanically identical to the standard SCD80X900. It features a 900 mm stroke and a 25 mm rod extending through both end caps. Because the rod area is subtracted on both sides, it generates an identical push and pull force of 2268 N at 0.5 MPa, reaching 4082 N at its 0.9 MPa maximum operating pressure.
This symmetric thrust is highly advantageous for battery cell stacking and long-traverse shuttle applications. The through-rod design improves bearing load distribution and provides anti-rotation characteristics. With a 28 mm adjustable cushion at each end to decelerate the heavy 900 mm travel, and a body length A(SCD) of 257 mm, it provides stable, balanced motion for automated production equipment.
Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD80X900 Technical Specifications
| Model | Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD80X900 |
|---|---|
| Series | SCD double-rod tie-rod cylinder |
| Bore size | Ø80 mm |
| Rod diameter | Ø25 mm (both ends) |
| Stroke | 900 mm |
| Rod configuration | Double rod — rod through both caps |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SCD (double-rod) datasheet. Because the rod runs through both caps, the effective area is (bore² − rod²) in both directions. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm, double rod)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | 3175 N |
| Max (@1.0 MPa) | 463 kgf | |
Push and pull are EQUAL on a double-rod cylinder — both chambers lose the rod area, so effective area = (bore² − rod²) each way. Actual usable force is lower than theoretical due to friction and back-pressure; size with a safety margin.
Model Code: Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD80X900
| SCD | Double-rod tie-rod cylinder series (rod out both ends). |
|---|---|
| 80 | Bore size in mm. |
| ×900 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related types: SC (single rod), SCJ (adjustable stroke), SCT (multi-position). SCD mounting: Basic, FA, LB, TC, TCM1. Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD80X900 Is Used
Battery Cell Shuttle Transfer
Moves battery cells across 900 mm stations with equal push and pull force, utilizing the rear rod for symmetric loading on long traverse carriages.
Module Stacking Pusher
Provides 2268 N of consistent thrust at 0.5 MPa for stacking battery modules, ensuring both extension and retraction handle the heavy load equally.
Pack Handling Stopper
Uses the double-rod configuration to act as a synchronized stopper and diverter on battery pack conveyor lines, maintaining stable non-rotating contact.
Is the Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD80X900 the Right Cylinder?
Choose this 80 mm bore when your battery handling system requires substantial equal bidirectional force (2268 N at 0.5 MPa) over a 900 mm span. If your application only needs one-sided actuation, the single-rod AirTAC SC80X900 is lighter and more compact. If the primary goal is resisting high side loads on a long transfer arm, a dedicated guided cylinder provides superior rigidity compared to a through-rod design.
For a 900 mm stroke, the extended unsupported rod is susceptible to bending under lateral loads; always use an external linear guide to support the load. To replace this unit, match the 80 mm bore, 900 mm stroke, PT3/8 port thread, basic mounting style, and confirm whether a magnetic sensor (-S) is needed.
Double-rod checklist
- ✓ Need equal force / speed both directions?
- ✓ Rear rod for tooling, stopper or sensor flag?
- ✓ Better rod guidance / anti-rotation?
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Keep BOTH rod ends clear of side load and interference.
- check Adjust end cushion screws for smooth stops.
- check Use SCD mounting accessory (FA / LB / TC / TCM1).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD80X900 FAQ
The B06- prefix indicates this is an AirTAC cylinder dedicated to battery-manufacturing lines. Mechanically, it is identical to the standard SCD80X900, offering the same 80 mm bore, 900 mm stroke, and 2268 N equal push/pull force at 0.5 MPa.
No, the 28 mm adjustable cushions only decelerate the piston near the end of stroke. They do not lock or hold the load. If your battery assembly process must maintain position without live air pressure, you must use an external mechanical lock or pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SCD Double-Rod Cylinders
Request a Quote for Airtac B06-SCD Battery-Specific Standard Cylinder B06-SCD80X900
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.