Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC20008MC1W
The AirTAC B52-GFC Copper-Free Air Source Treatment Component B52-GFC20008MC1W is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT1/4" ports, a 5 µm element, a manual drain and regulation over 0.05 - 0.9 MPa (7 - 130 psi).
- TypeTwo-unit set (F.R. + L.)
- Port sizePT1/4"
- Regulating range0.05 - 0.9 MPa (7 - 130 psi)
- Filtering grade5 µm
- DrainManual drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC20008MC1W
The AirTAC GFC series is a two-unit air preparation set: a filter-regulator body plus a separate lubricator, giving you filtration, pressure regulation and oil-mist lubrication in one purchase. This configuration, the GFC20008MC1W, is the 200 size with a PT1/4 port. The M code gives a manual drain on the filter bowl, the W code fits the finer 5 um filter element, and the C1 code adds the external round pressure gauge reading in MPa.
This is a genuine AirTAC part in the G range, which runs from size 200 up to 600 with larger ports and higher flow. Bowls on 200/300/400 sizes are polycarbonate. Medium is compressed air, maximum inlet pressure is 1.0 MPa (145 psi), and the working temperature range is -5 to 70 C. Flow figures are published as curves rather than a single rating, so we confirm the datasheet numbers for your application on request.
Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC20008MC1W Technical Specifications
| Model | Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC20008MC1W |
|---|---|
| Series | GFC200 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | PT1/4" (PT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, MPa scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC20008MC1W
| GFC200 | G-series two-unit set, 200 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR200-08 filter regulator and GL200-08 lubricator.
Size Class & How It Differs From GC
- GFC200PT1/8" - PT1/4"
- GFC300PT1/4" - PT1/2"
- GFC400PT3/8" - PT1/2"
- GFC600PT3/4" - PT1"
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC200 · PT1/4" · 5 µm |
|---|---|
| One size up | GFC300 |
| Three-unit equivalent | GC200-08 |
| Build order | Filter regulator first, lubricator last |
Where the Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC20008MC1W Is Used
CNC machine pneumatic clamping
Clean 5 um air at a set pressure, with oil mist carried to the clamp cylinders and chuck actuator on a machining centre's fixture circuit.
Packaging machine valve island
Filtered, regulated and lubricated supply feeding the solenoid valves and pick-and-place cylinders of a carton or blister packaging line.
Conveyor air-jet cleaning station
Regulated pressure and lubricated air for the blow-off nozzles and guide-rail adjusters along a bottling or food-packaging conveyor.
Is the Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC20008MC1W the Right Set?
The 200 size with a 1/4" port suits compact circuits; step up to 300/400/600 if your demand grows, since each step increases both port size and flow capacity. The manual drain here needs an operator to bleed the bowl - choose automatic (A) or the differential-pressure default if you want hands-off drainage. The 5 um element (W) is the right pick for valves and cylinders that dislike coarser air; the standard 40 um suits general supply. The C1 round gauge reads in MPa; psi and bar scales are available on other variants. PT thread is the standard; G(BSPP) and NPT are catalogue options to order. AirTAC publishes flow as curves, not a single rated figure, so ask us to confirm sizing against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (PT1/4" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Two-unit (GFC) or three-unit (GC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter regulator first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.05 - 0.9 MPa (7 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the set above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR200-08 filter regulator on its own.
Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC20008MC1W FAQ
AirTAC publishes flow for the G series as curves, not as a single rated number, so there is no one figure we can honestly quote here. Tell us your working pressure and demand and we will confirm the right size from the datasheet on request before you order.
The M code fits a manual drain, so condensate must be bled from the bowl by hand at intervals. If nobody is at the machine regularly, the automatic (A) or differential-pressure drain variants of the same set are the better decode - same filtering, regulating and lubricating function, different drainage.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC20008MC1W
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.