Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC20008MNWK
The AirTAC B52-GFC Copper-Free Air Source Treatment Component B52-GFC20008MNWK is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT1/4" ports, a 5 µm element, a manual drain and regulation over 0.05 - 0.9 MPa (7 - 130 psi).
- TypeTwo-unit set (F.R. + L.)
- Port sizePT1/4"
- Regulating range0.05 - 0.9 MPa (7 - 130 psi)
- Filtering grade5 µm
- DrainManual drain
- Bowl materialPC
- Pressure gaugeNot fitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC20008MNWK
GFC20008MNWK is an AirTAC GFC two-unit air-preparation set: a filter regulator and a lubricator paired to deliver filtered, regulated and lubricated compressed air through a PT1/4 (1/4 inch) port. This code specifies a manual drain (M) on the filter bowl, a fine 5 um (W) filter element, a reverse/check valve (K) fitted, and no gauge (N). With the manual drain, the regulator adjustment range is 0.05-0.9 MPa (7-130 psi); maximum working pressure is 1.0 MPa (145 psi), and the operating temperature range is -5 to 70 C. The bowls on this size 200 set are polycarbonate (PC).
This is a genuine AirTAC G-series part. The GFC family is offered in 200, 300, 400 and 600 sizes with ports from 1/8 to 1 inch, automatic, manual or differential-pressure drain options, 40 um or 5 um elements, G (BSPP) and NPT thread options, and gauge options. Flow is published as curves rather than a single rating, so we confirm sizing and datasheet figures on request.
Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC20008MNWK Technical Specifications
| Model | Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC20008MNWK |
|---|---|
| Series | GFC200 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | PT1/4" (PT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Not fitted |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC20008MNWK
| GFC200 | G-series two-unit set, 200 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| N | No pressure gauge (N). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR200-08 filter regulator and GL200-08 lubricator.
Size Class & How It Differs From GC
- GFC200PT1/8" - PT1/4"
- GFC300PT1/4" - PT1/2"
- GFC400PT3/8" - PT1/2"
- GFC600PT3/4" - PT1"
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC200 · PT1/4" · 5 µm |
|---|---|
| One size up | GFC300 |
| Three-unit equivalent | GC200-08 |
| Build order | Filter regulator first, lubricator last |
Where the Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC20008MNWK Is Used
Paint-shop spray gun supply
Feeds spray guns in a finish booth with filtered, pressure-regulated and oil-mist lubricated air, with the 5 um element helping keep fine particulate out of the finish.
CNC fixture clamping circuits
Prepares the air feeding clamping cylinders on a machining centre fixture, holding a set regulated pressure with a check valve to guard against backflow.
Pneumatic air-tool stations
Serves a bench drop for impact wrenches and riveters, combining water and particle filtration, pressure adjustment and in-line lubrication in one two-piece set.
Is the Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC20008MNWK the Right Set?
Size 200 with a PT1/4 port suits 1/4 inch pneumatic circuits; if your air demand exceeds what that line comfortably carries, step up to a 300/400/600 set with a larger port. Drain choice: the manual drain here (M) suits points where an operator can bleed the bowl on a schedule; automatic (A) drains unattended, and the differential-pressure default needs no drain fitting. Filter grade: 5 um (W) for finer particle removal, 40 um is the standard element. Thread is PT as the standard; G (BSPP) and NPT are catalogue options to order. This code specifies no gauge (N); gauge options exist for the family. Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (PT1/4" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Two-unit (GFC) or three-unit (GC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter regulator first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.05 - 0.9 MPa (7 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the set above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR200-08 filter regulator on its own.
Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC20008MNWK FAQ
AirTAC publishes G-series flow as curves rather than a single rated figure, so we do not quote one number. Send us your line pressure and air demand and we will confirm the correct size from the datasheet on request before you order.
The M in the code sets a manual drain, which you operate by hand to empty the filter bowl. Automatic (A) and the differential-pressure default are alternative catalogue drain types; a manual-drain unit also carries the wider 0.05-0.9 MPa (7-130 psi) regulator adjustment range.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC20008MNWK
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.