Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC200C06NW
The AirTAC B52-GFC Copper-Free Air Source Treatment Component B52-GFC200C06NW is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with See datasheet ports, a 40 µm element, a differential-pressure drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).
- TypeTwo-unit set (F.R. + L.)
- Port sizeSee datasheet
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC200C06NW
GFC200C06NW is an AirTAC G-series two-unit air-preparation set: a filter-regulator and a lubricator mounted as one assembly, so a single installation filters, regulates and lubricates the compressed air. This 200-size configuration is threaded PT1/8, carries the fine 5 um (W) filter element, drains its bowl by differential pressure and is supplied without a gauge.
This is a genuine AirTAC part in the 200 frame of a family that also steps through 300, 400 and 600 sizes. Max working pressure is 1.0 MPa (145 psi), the regulator adjusts from 0.15 to 0.9 MPa (20-130 psi) with the differential-pressure drain, and the working temperature range is -5 to 70 C (non-freezing). Flow is published as curves rather than a single rated figure - we will confirm the datasheet numbers on request.
Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC200C06NW Technical Specifications
| Model | Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC200C06NW |
|---|---|
| Series | GFC200 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC200C06NW
| GFC200 | G-series two-unit set, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR200-C0 filter regulator and GL200-C0 lubricator.
Size Class & How It Differs From GC
- GFC200PT1/8" - PT1/4"
- GFC300PT1/4" - PT1/2"
- GFC400PT3/8" - PT1/2"
- GFC600PT3/4" - PT1"
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC200 · See datasheet · 40 µm |
|---|---|
| One size up | GFC300 |
| Three-unit equivalent | GC200-C0 |
| Build order | Filter regulator first, lubricator last |
Where the Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC200C06NW Is Used
Air-knife blow-off station
Feeding clean, regulated and lubricated air to air-knife nozzles that dry parts leaving a wash station, with 5 um filtration guarding the nozzle orifices.
Tray-sealer machine prep
Preparing filtered, regulated and lubricated air for the clamp and seal circuits of a food tray-sealing machine at the machine's 1/8 in inlet.
Inspection fixture clamping
Supplying fine-filtered, pressure-stabilised air to clamping fixtures on a quality inspection station, where particulate carryover must stay low.
Is the Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC200C06NW the Right Set?
The 200 size with PT1/8 ports fits compact branch take-offs; step up to 300, 400 or 600 when larger ports and more flow are needed. The W in this code selects the 5 um element, the right choice where finer downstream components need cleaner air than the standard 40 um grade provides; the plain variant carries 40 um. Draining here is differential-pressure, with manual (M) and automatic (A) bowls as decodable alternatives. A gauge can be added for visual setpoint control, and G (BSPP) or NPT thread versions are catalogue options alongside the standard PT. Flow appears only as published curves, not a single rating, so send us your requirements and we will confirm sizing before you order.
Quick checklist
- ✓ Body size for your peak flow (See datasheet here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Two-unit (GFC) or three-unit (GC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter regulator first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the set above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR200-C0 filter regulator on its own.
Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC200C06NW FAQ
AirTAC publishes flow for the G-series as curves, not as a single rated figure, so no one number is quoted here. Tell us the flow and working pressure your circuit needs and we will confirm the datasheet curve for this exact set before you order.
Yes. The N in this code means the set is supplied without a gauge. Units with a regulator can carry an embedded square gauge, with MPa, psi or bar scales, or an external round gauge as an option. Specify the gauge code variant when ordering if you want a visual setpoint reference.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC200C06NW
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.