Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC200C08C1W
The AirTAC B52-GFC Copper-Free Air Source Treatment Component B52-GFC200C08C1W is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with See datasheet ports, a 40 µm element, a differential-pressure drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).
- TypeTwo-unit set (F.R. + L.)
- Port sizeSee datasheet
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC200C08C1W
The AirTAC GFC family pairs a filter-regulator and a lubricator in one two-unit set: it strips water and particulate from compressed air, holds a set downstream pressure, and adds oil mist for the equipment fed from the outlet. This configuration is size 200 with PT1/4 ports, the fine 5 um (W) element, differential-pressure bowl draining, and the optional external round pressure gauge with an MPa scale (C1). Maximum inlet pressure is 1.0 MPa (145 psi); with differential-pressure draining the regulation range is 0.15-0.9 MPa (20-130 psi); the set runs from -5 to 70 C, non-freezing. At size 200 the bowls are PC (polycarbonate).
This is a genuine AirTAC part. The G series spans sizes 200 to 600 with ports from 1/8 in to 1 in, and each position of the code can be re-ordered: drain type (differential-pressure, automatic A or manual M), 5 um (W) or standard 40 um element, embedded square gauge or external round gauge in MPa, psi or bar scales, PT, G (BSPP) or NPT thread, and bracket option. Flow is published as curves, not a single rating, so we confirm the datasheet and sizing for your application on request.
Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC200C08C1W Technical Specifications
| Model | Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC200C08C1W |
|---|---|
| Series | GFC200 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC200C08C1W
| GFC200 | G-series two-unit set, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR200-C0 filter regulator and GL200-C0 lubricator.
Size Class & How It Differs From GC
- GFC200PT1/8" - PT1/4"
- GFC300PT1/4" - PT1/2"
- GFC400PT3/8" - PT1/2"
- GFC600PT3/4" - PT1"
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC200 · See datasheet · 40 µm |
|---|---|
| One size up | GFC300 |
| Three-unit equivalent | GC200-C0 |
| Build order | Filter regulator first, lubricator last |
Where the Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC200C08C1W Is Used
Pneumatic deburring and routing tools
Air deburrers and die grinders at a finishing bench: the 5 um element keeps fine grit out of the tool, the lubricator feeds the vane motors, and the MPa gauge lets operators verify the recommended inlet pressure.
Small bottling and filling machine cylinders
Short-stroke cylinders on a small filling or capping machine: filtered, regulated, lubricated air at a stable setpoint, with the 5 um element protecting the close-tolerance valve spools on the machine.
Test-rig actuator supply
Actuators on an engineering test rig: repeatable regulated pressure readable on the round MPa gauge, fine 5 um filtration for instrumentation-grade components, and oil mist for long-duration cycling.
Is the Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC200C08C1W the Right Set?
Within the G series, step up from size 200 (PT1/4 here) to 300, 400 or 600 when your circuit needs a larger port and more flow. Drain choice for the filter bowl is differential-pressure (the default, as here), automatic (A) or manual (M); note that the regulation range depends on drain type: 0.15-0.9 MPa with auto or differential draining, 0.05-0.9 MPa with manual. Filter grade is the key choice here: 40 um is standard and suits general cylinder supply, while W selects the 5 um element for equipment more sensitive to fine particulate. Gauge choices are embedded square, external round in MPa/psi/bar scales (C1 here is round, MPa), or deleted with N. Thread is PT as standard, with G (BSPP) and NPT orderable as catalogue options; J deletes the bracket.
Flow figures are published as curves, not a single rated number, so send us your line pressure and required flow and we will confirm sizing from the datasheet before you order.
Quick checklist
- ✓ Body size for your peak flow (See datasheet here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Two-unit (GFC) or three-unit (GC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter regulator first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the set above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR200-C0 filter regulator on its own.
Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC200C08C1W FAQ
AirTAC publishes G-series flow as performance curves rather than one rated figure, so we do not quote a single l/min or SCFM number here. Tell us your line pressure and required flow and we will confirm the correct size from the datasheet on request.
The blank (default) element is 40 um, which suits general cylinder and valve supply. W selects a 5 um element for downstream equipment more sensitive to fine particulate, such as pilot valves and precision air tools. The rest of this code decodes as PT1/4 thread, differential-pressure draining and an external round gauge reading in MPa.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC200C08C1W
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.