Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC200C08MC1WK
The AirTAC B52-GFC Copper-Free Air Source Treatment Component B52-GFC200C08MC1WK is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with See datasheet ports, a 40 µm element, a differential-pressure drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).
- TypeTwo-unit set (F.R. + L.)
- Port sizeSee datasheet
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC200C08MC1WK
GFC200C08MC1WK is a genuine AirTAC G-series two-unit F.R.L. set: a filter regulator and a lubricator supplied as one pair. In one pass it removes water and particulate through a 5um element, holds the downstream pressure set on the regulator, and adds oil mist for air tools and cylinders. This configuration is size 200 with a PT1/4 port, has a manual-drain bowl, an external round pressure gauge reading in MPa, and a reverse (check) valve fitted. Max working pressure is 1.0 MPa (145 psi); operating temperature is -5 to 70 C.
The G-series F.R.L. range runs from size 200 to 600 with ports from 1/8 to 1 inch, and options including automatic, manual or differential-pressure drains, 40um or 5um elements, square or round gauges with MPa, psi or bar scales, G (BSPP) and NPT thread variants, and the reverse-flow valve. AirTAC publishes flow as characteristic curves rather than a single rating, so we confirm flow and full datasheet figures on request.
Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC200C08MC1WK Technical Specifications
| Model | Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC200C08MC1WK |
|---|---|
| Series | GFC200 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC200C08MC1WK
| GFC200 | G-series two-unit set, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR200-C0 filter regulator and GL200-C0 lubricator.
Size Class & How It Differs From GC
- GFC200PT1/8" - PT1/4"
- GFC300PT1/4" - PT1/2"
- GFC400PT3/8" - PT1/2"
- GFC600PT3/4" - PT1"
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC200 · See datasheet · 40 µm |
|---|---|
| One size up | GFC300 |
| Three-unit equivalent | GC200-C0 |
| Build order | Filter regulator first, lubricator last |
Where the Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC200C08MC1WK Is Used
Pneumatic press cell
Conditions the supply to a compact pneumatic press or clamp cylinder at an assembly cell: the 5um element protects the valve, the regulator holds working pressure, and the lubricator feeds the cylinder seals.
Packaging line valve island
Feeds cleaned, regulated, lubricated air to the solenoid valve manifold on a bottling or carton-packing line, with the manual drain bled at each changeover and cleaning shift.
Maintenance air-tool bench
A point-of-use drop at a maintenance bench where impact wrenches, ratchets and air screwdrivers need filtered, pressure-set and oil-mist lubricated air.
Is the Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC200C08MC1WK the Right Set?
Step through sizes 200, 300, 400 and 600 to match the port and air demand of your line; size 200 with a 1/4 inch port suits compact manifolds and point-of-use drops. The manual drain here means the bowl is bled on a routine, which suits attended cells; automatic or differential-pressure drains are the choices for unattended installations. The W in this code selects the finer 5um element over the standard 40um. Gauges come square (embedded) or round with MPa, psi or bar scales, G (BSPP) or NPT threads are catalogue options beside the standard PT, and K adds the reverse-flow valve. Flow for this family is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (See datasheet here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Two-unit (GFC) or three-unit (GC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter regulator first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the set above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR200-C0 filter regulator on its own.
Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC200C08MC1WK FAQ
AirTAC publishes flow for the G-series as characteristic curves, not a single rated figure, so no rated flow is quoted here. Send us your line pressure and air demand and we will confirm the flow from the datasheet on request.
K indicates that a reverse (check) valve is fitted on this set. If your circuit does not need one, the same configuration is available as GFC200C08MC1W without the valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC200C08MC1WK
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.