Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC200C08MNW
The AirTAC B52-GFC Copper-Free Air Source Treatment Component B52-GFC200C08MNW is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with See datasheet ports, a 40 µm element, a differential-pressure drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).
- TypeTwo-unit set (F.R. + L.)
- Port sizeSee datasheet
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC200C08MNW
GFC200C08MNW is a genuine AirTAC G-series two-unit F.R.L. set for compressed air: a filter-regulator plus a separate lubricator in one matched pair. This 200-size configuration has PT1/4 ports, a manual drain on the filter bowl and the 5 um (W) filter element instead of the 40 um standard, with no pressure gauge fitted (N). It strips finer water and particulate from the air, holds your set downstream pressure and meters oil mist for lubricated equipment.
This is a genuine AirTAC part. The G-series spans 200, 300, 400 and 600 sizes with 1/8 in to 1 in ports, and drain type, filter grade, gauge and valve options vary by code. Max working pressure is 1.0 MPa (145 psi), the temperature range is -5 to 70 C (non-freezing), and the 200-size bowls are polycarbonate. Flow is published as curves rather than a single rated figure, so we confirm datasheet numbers on request.
Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC200C08MNW Technical Specifications
| Model | Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC200C08MNW |
|---|---|
| Series | GFC200 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC200C08MNW
| GFC200 | G-series two-unit set, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR200-C0 filter regulator and GL200-C0 lubricator.
Size Class & How It Differs From GC
- GFC200PT1/8" - PT1/4"
- GFC300PT1/4" - PT1/2"
- GFC400PT3/8" - PT1/2"
- GFC600PT3/4" - PT1"
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC200 · See datasheet · 40 µm |
|---|---|
| One size up | GFC300 |
| Three-unit equivalent | GC200-C0 |
| Build order | Filter regulator first, lubricator last |
Where the Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC200C08MNW Is Used
Air-bearing and nozzle bench
Supplies finer-filtered, regulated and lubricated air to a bench of air nozzles and small air-powered devices that do not tolerate coarse debris.
Lab automation actuators
Prepares air for grippers and small cylinders on laboratory automation where the 5 um element supports cleaner supply air.
Jig and fixture clamping
Feeds clamping cylinders on welding and machining jigs, with manual bowl draining worked into the fixture maintenance routine.
Is the Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC200C08MNW the Right Set?
Pick this W-coded set when the 40 um standard element is too coarse for your downstream devices but you still need lubrication in the same line. At 200 size with PT1/4 ports it matches small-bore circuits; step to 300, 400 or 600 for larger ports. The M drain is manual, so drain the bowl by hand - with manual drainage the regulator adjusts from 0.05-0.9 MPa (7-130 psi); automatic or differential-pressure drain versions adjust from 0.15-0.9 MPa (20-130 psi). No gauge is fitted (N); F1-coded variants add the embedded square MPa gauge. Thread is PT as standard; G (BSPP) and NPT are catalogue options to order. Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (See datasheet here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Two-unit (GFC) or three-unit (GC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter regulator first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the set above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR200-C0 filter regulator on its own.
Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC200C08MNW FAQ
Flow for this set is published as curves across the pressure range rather than as a single rated figure, so we cannot quote one number here. Send us your operating pressure and air demand and we will confirm the datasheet flow figures for this model on request.
The W suffix selects the 5 um filter element, which captures finer particulate than the 40 um standard - useful ahead of sensitive pilot valves and small devices. Everything else matches the plain code: 1/4 in PT ports, manual drain, no gauge. If you want on-unit pressure reading, choose the F1-coded variant with the square MPa gauge.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC200C08MNW
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.