Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC200C08MNWK
The AirTAC B52-GFC Copper-Free Air Source Treatment Component B52-GFC200C08MNWK is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with See datasheet ports, a 40 µm element, a differential-pressure drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).
- TypeTwo-unit set (F.R. + L.)
- Port sizeSee datasheet
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC200C08MNWK
The AirTAC GFC series is a two-piece air preparation set: a filter-regulator and a lubricator paired as one station, so a single supply point delivers filtered, regulated and lubricated compressed air. This GFC200C08MNWK is the size 200 frame with 1/4 inch PT ports, a manual drain on the filter bowl, a fine 5 um element and a built-in check valve that blocks backflow through the set. No gauge is fitted, so pressure is read on the machine or tool side.
This is a genuine AirTAC part. Maximum working pressure is 1.0 MPa (145 psi), the temperature range is -5 to 70 C, and the bowls on the size 200 frame are polycarbonate. Because the drain is manual, the regulator adjusts from 0.05 to 0.9 MPa (7-130 psi). The GFC series spans sizes 200 to 600 with ports from 1/8 to 1 inch, plus drain, element, gauge and G/NPT thread variants; flow is published as curves rather than a single rating, so we confirm datasheet figures on request.
Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC200C08MNWK Technical Specifications
| Model | Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC200C08MNWK |
|---|---|
| Series | GFC200 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC200C08MNWK
| GFC200 | G-series two-unit set, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR200-C0 filter regulator and GL200-C0 lubricator.
Size Class & How It Differs From GC
- GFC200PT1/8" - PT1/4"
- GFC300PT1/4" - PT1/2"
- GFC400PT3/8" - PT1/2"
- GFC600PT3/4" - PT1"
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC200 · See datasheet · 40 µm |
|---|---|
| One size up | GFC300 |
| Three-unit equivalent | GC200-C0 |
| Build order | Filter regulator first, lubricator last |
Where the Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC200C08MNWK Is Used
Vehicle service air tools
Impact wrenches, ratchets and air ripples on a workshop drop need clean, regulated and oil-mist-lubricated air; this set conditions the line at the reel outlet and the manual drain fits the end-of-shift routine.
Case packing cylinders
Carton erecting and case sealing machines run cylinders and air grippers continuously; the set mounted at the machine inlet keeps moisture and scale out while the regulator holds the setting the OEM specifies.
Pneumatic clamping fixtures
Machining cell clamps fed through this set get filtered, regulated, lubricated air, and the fitted check valve helps hold the downstream circuit against backflow when supply pressure is lost.
Is the Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC200C08MNWK the Right Set?
Stay at size 200 with the 1/4 inch port for compact drop points, or step up to 300, 400 or 600 as line demand grows. The manual drain suits stations emptied on a set maintenance round and widens the regulator range to 0.05-0.9 MPa (7-130 psi); automatic or differential-pressure drain variants suit unattended installations. The 5 um element is the finer of the two catalogue grades (40 um is standard) and suits airlines feeding precision valves and tools. Gauges in MPa, psi or bar scale, a check valve and G or NPT threads are ordered options.
Flow for the GFC series is published as curves, not a single rated number, so send us your air demand and we will confirm sizing against the datasheet before you order.
Quick checklist
- ✓ Body size for your peak flow (See datasheet here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Two-unit (GFC) or three-unit (GC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter regulator first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the set above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR200-C0 filter regulator on its own.
Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC200C08MNWK FAQ
AirTAC publishes flow for the GFC series as curves, not as a single rated figure, so we do not quote a number here. Tell us your expected air demand at pressure and we will confirm the correct size against the datasheet on request.
The M in the code selects a manual drain, emptied by hand as part of maintenance, which also widens the regulator range to 0.05-0.9 MPa (7-130 psi). The N means no gauge is fitted; a square or round gauge with MPa, psi or bar scale can be ordered if you want a local pressure readout.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC200C08MNWK
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.