Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC200C08NWK
The AirTAC B52-GFC Copper-Free Air Source Treatment Component B52-GFC200C08NWK is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with See datasheet ports, a 40 µm element, a differential-pressure drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).
- TypeTwo-unit set (F.R. + L.)
- Port sizeSee datasheet
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC200C08NWK
GFC200C08NWK is a two-piece AirTAC GFC air-preparation set for compressed air: a filter-regulator body plus a separate lubricator, so filtration, pressure regulation and oil-mist lubrication come from one order. This configuration is the size 200 frame with a 1/4 in PT port, the 5 um filter element, the default differential-pressure drain, no pressure gauge, and a reverse (check) valve fitted. The regulator adjusts from 0.15 to 0.9 MPa (20-130 psi), maximum working pressure is 1.0 MPa (145 psi), the working temperature range is -5 to 70 C non-freezing, and the 200-size filter bowl is PC (polycarbonate).
This is a genuine AirTAC part. The GFC family runs in size 200, 300, 400 and 600 frames with ports from 1/8 in to 1 in, and options covering 40 um or 5 um elements, differential-pressure, automatic or manual drains, external round or square gauges in MPa, psi or bar scales, and a reverse/check valve. Flow for the G series is published as curves rather than a single rated figure, so we confirm the datasheet numbers for your application on request.
Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC200C08NWK Technical Specifications
| Model | Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC200C08NWK |
|---|---|
| Series | GFC200 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC200C08NWK
| GFC200 | G-series two-unit set, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR200-C0 filter regulator and GL200-C0 lubricator.
Size Class & How It Differs From GC
- GFC200PT1/8" - PT1/4"
- GFC300PT1/4" - PT1/2"
- GFC400PT3/8" - PT1/2"
- GFC600PT3/4" - PT1"
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC200 · See datasheet · 40 µm |
|---|---|
| One size up | GFC300 |
| Three-unit equivalent | GC200-C0 |
| Build order | Filter regulator first, lubricator last |
Where the Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC200C08NWK Is Used
Pneumatic clamping on CNC fixtures
Feeds the clamp cylinders on a machining-centre fixture: the 5 um element cleans the air reaching the clamping valves, the regulator holds the clamp pressure you set, the lubricator mists oil for the cylinder seals, and the check valve guards against backflow.
Air-tool supply at a workshop bench
A point-of-use set for impact wrenches and air ratchets at a vehicle repair bench: filter, regulated pressure and oil mist in one two-piece set sized at 1/4 in PT, specified without a gauge where the bench panel already carries one.
Pick-and-place gripper air on assembly cells
Conditions the supply to gripper and small-slide actuators on an electronics assembly cell, where the finer 5 um grade suits sensitive pneumatic components and the compact 200 frame fits crowded manifolds.
Is the Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC200C08NWK the Right Set?
The real choices here: the 200 frame with a 1/4 in PT port is the compact step in the range (200/300/400/600) - match frame and port against the air your circuit actually uses. The W selects the 5 um element over the 40 um standard, N deletes the pressure gauge (external round or square gauges in MPa, psi or bar scales are orderable options), and K fits the reverse/check valve. Drain on this code is the default differential-pressure type; A (automatic) and M (manual) are the alternatives. PT is the standard thread, with G (BSPP) and NPT as catalogue options. G-series flow is published as curves rather than one rated number, so ask us to confirm sizing against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (See datasheet here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Two-unit (GFC) or three-unit (GC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter regulator first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the set above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR200-C0 filter regulator on its own.
Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC200C08NWK FAQ
AirTAC publishes G-series flow capacity as curves rather than a single rated figure, so we do not quote a number on the page. Tell us your working pressure and the air your circuit needs, and we will confirm the sizing from the datasheet on request.
No. N means no gauge is fitted on this set. GFC sets can be ordered with an external round gauge (C) or square gauge (F) in MPa (1), psi (2) or bar (3) scales - for example C1 for a round MPa gauge - so tell us if you want a gauge specified instead.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC200C08NWK
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.