Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC30008AC2W
The AirTAC B52-GFC Copper-Free Air Source Treatment Component B52-GFC30008AC2W is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT1/4" ports, a 5 µm element, a automatic drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).
- TypeTwo-unit set (F.R. + L.)
- Port sizePT1/4"
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade5 µm
- DrainAutomatic drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC30008AC2W
The GFC two-unit set pairs a filter regulator with a lubricator, giving filtration, pressure regulation and oil-mist lubrication from compressed air in one matched order. This GFC30008AC2W is the 300 size with PT1/4 ports, the fine 5 um filter element, an automatic drain, and a round external gauge reading in psi. The auto drain empties the bowl on its own, which suits panels and machines that run without an operator watching the bowl.
It is a genuine AirTAC part in the G series, available across the 200, 300, 400 and 600 sizes with your choice of filter grade, drain type, gauge scale and PT, G or NPT thread. Maximum working pressure is 1.0 MPa (145 psi) and the temperature range is -5 to 70 C. Because published flow is given as curves rather than one rating, we confirm datasheet and sizing figures on request.
Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC30008AC2W Technical Specifications
| Model | Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC30008AC2W |
|---|---|
| Series | GFC300 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | PT1/4" (PT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Automatic drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC30008AC2W
| GFC300 | G-series two-unit set, 300 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| A | Drain: Automatic drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR300-08 filter regulator and GL300-08 lubricator.
Size Class & How It Differs From GC
- GFC200PT1/8" - PT1/4"
- GFC300PT1/4" - PT1/2"
- GFC400PT3/8" - PT1/2"
- GFC600PT3/4" - PT1"
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC300 · PT1/4" · 5 µm |
|---|---|
| One size down | GFC200 |
| One size up | GFC400 |
| Three-unit equivalent | GC300-08 |
| Build order | Filter regulator first, lubricator last |
Where the Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC30008AC2W Is Used
Pneumatic press tooling supply
Regulates and lubricates the air feeding a bench-mounted pneumatic press used for riveting and staking, with the psi gauge letting operators verify set pressure and the auto drain protecting the bowl from collected water.
Pick-and-place module feed
Supplies the vacuum generators and gripper cylinders on a pick-and-place module, where the 5 um element helps keep small orifice components clean and the lubricator maintains the air cylinders.
Textile machine air service
Point-of-use treatment for the air jets and cylinders on weaving and spinning machinery, combining fine filtration, stable regulation and oil mist in a single two-unit connection.
Is the Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC30008AC2W the Right Set?
Stay with the 300 size and 1/4-inch PT ports for standard machine supply lines, or move to the larger 400/600 sizes where the line demands more air. Automatic drain, as specified here, is the low-attention choice; manual and differential-pressure drains are also available in the family. The 5 um element is the finer filtration option versus the 40 um standard, and this round gauge reads psi, which suits US-facing panels; MPa and bar scales and G or NPT threads are orderable alternatives. Flow appears in the catalogue only as curves, so ask us to confirm sizing against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (PT1/4" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Two-unit (GFC) or three-unit (GC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter regulator first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the set above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR300-08 filter regulator on its own.
Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC30008AC2W FAQ
There is no single rated flow figure to state: AirTAC publishes flow for the G series as characteristic curves. Share your operating pressure and air demand and we will confirm the relevant datasheet figures on request so you can size the set correctly.
Yes. This version carries a round external gauge with a psi scale; the same GFC300 set is available with MPa or bar scales (codes with 1 or 3 in the gauge position), and the embedded square gauge is the alternative style. Choose the code that matches your panel convention.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC30008AC2W
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.