Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC300C15C1W
The AirTAC B52-GFC Copper-Free Air Source Treatment Component B52-GFC300C15C1W is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with See datasheet ports, a 40 µm element, a differential-pressure drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).
- TypeTwo-unit set (F.R. + L.)
- Port sizeSee datasheet
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC300C15C1W
GFC300C15C1W is a two-piece AirTAC G-series air-treatment set: a filter regulator plus a lubricator, with the W option denoting the finer 5 um filter element instead of the standard 40 um grade. It removes water and fine particulate, regulates downstream pressure and adds oil mist in one combined order. This configuration is sized 300 with a PT1/2 port (PT thread as standard), a differential-pressure drain and a round gauge with MPa scale. Regulation covers 0.15-0.9 MPa (20-130 psi) with this drain type; the set carries compressed air at up to 1.0 MPa (145 psi) and works from -5 to 70 C (non-freezing). Both bowls on this 300 size are PC (polycarbonate).
This is a genuine AirTAC part sold by a distributor for the US market. The G-series spans 200, 300, 400 and 600 sizes with ports from 1/8 to 1 inch, plus drain choices, filter grades, gauge types and scales, G (BSPP) and NPT threads and a reverse valve option. AirTAC publishes flow as curves rather than a single rating, so send us your application and we will confirm sizing and datasheet figures on request.
Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC300C15C1W Technical Specifications
| Model | Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC300C15C1W |
|---|---|
| Series | GFC300 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC300C15C1W
| GFC300 | G-series two-unit set, 300 body — sets the port range. |
|---|---|
| C1 | Port size See datasheet. This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR300-C1 filter regulator and GL300-C1 lubricator.
Size Class & How It Differs From GC
- GFC200PT1/8" - PT1/4"
- GFC300PT1/4" - PT1/2"
- GFC400PT3/8" - PT1/2"
- GFC600PT3/4" - PT1"
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC300 · See datasheet · 40 µm |
|---|---|
| One size down | GFC200 |
| One size up | GFC400 |
| Three-unit equivalent | GC300-C1 |
| Build order | Filter regulator first, lubricator last |
Where the Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC300C15C1W Is Used
Electronics assembly cells
Feeds pick-and-place and board-handling cylinders on an electronics line with finer 5 um filtration, helping keep small pneumatic valve passages clean in a compact assembly environment.
Laboratory automation
Conditions the compressed-air supply for lab automation equipment such as sample handlers and actuated fixtures, where regulated pressure and the finer 5 um element suit sensitive instrumentation valves.
Machine calibration benches
Supplies test and calibration benches that use pneumatic clamps and actuators, combining regulated pressure, lubrication and 5 um filtration at a single 1/2 inch supply point.
Is the Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC300C15C1W the Right Set?
The W in this code selects the 5 um element; choose it over the standard 40 um grade when finer dirt retention matters for the downstream valves and cylinders. The 300 size with a 1/2 inch PT port is the mid-range step in the G-series, with 200, 400 and 600 sizes available if your flow curve points elsewhere. This unit uses the differential-pressure drain; automatic (A) and manual (M) drains are catalogue options. A round gauge with MPa scale is fitted, and other gauge types and scales can be ordered. Thread is PT as standard, with G (BSPP) and NPT available to order, and a bracket is included. Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (See datasheet here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Two-unit (GFC) or three-unit (GC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter regulator first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the set above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR300-C1 filter regulator on its own.
Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC300C15C1W FAQ
AirTAC publishes G-series flow as curves rather than a single rating, so we do not state one rated number. Share your line pressure and air demand and we will confirm the sizing from the datasheet on request.
The W option filters to 5 um instead of the standard 40 um, which suits circuits with fine clearances such as precision valves, small cylinders and instrumentation. The element is a catalogue option on this set, so order the W code when your application calls for the finer grade.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC300C15C1W
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.