Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC300C15MC1WK
The AirTAC B52-GFC Copper-Free Air Source Treatment Component B52-GFC300C15MC1WK is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with See datasheet ports, a 40 µm element, a differential-pressure drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).
- TypeTwo-unit set (F.R. + L.)
- Port sizeSee datasheet
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC300C15MC1WK
GFC300C15MC1WK is a two-piece AirTAC G-series air-treatment set: a filter-regulator paired with a lubricator, so the compressed air is filtered, regulated and then oil-mist lubricated in one group. This configuration has 1/2 in PT ports, a manual drain on the filter bowl, a 5 um filter element, a round pressure gauge scaled in MPa, and a reverse (check) valve fitted to hold the downstream circuit if supply pressure drops. Both bowls on this 300 size are polycarbonate.
This is a genuine AirTAC part. The GFC two-unit sets are offered in 200, 300, 400 and 600 sizes with ports from 1/8 in to 1 in, and this model runs at up to 1.0 MPa (145 psi) inlet with a 0.05-0.9 MPa (7-130 psi) regulating range. Flow for the set is published as performance curves rather than a single rating, so we confirm the datasheet figures on request.
Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC300C15MC1WK Technical Specifications
| Model | Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC300C15MC1WK |
|---|---|
| Series | GFC300 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC300C15MC1WK
| GFC300 | G-series two-unit set, 300 body — sets the port range. |
|---|---|
| C1 | Port size See datasheet. This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR300-C1 filter regulator and GL300-C1 lubricator.
Size Class & How It Differs From GC
- GFC200PT1/8" - PT1/4"
- GFC300PT1/4" - PT1/2"
- GFC400PT3/8" - PT1/2"
- GFC600PT3/4" - PT1"
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC300 · See datasheet · 40 µm |
|---|---|
| One size down | GFC200 |
| One size up | GFC400 |
| Three-unit equivalent | GC300-C1 |
| Build order | Filter regulator first, lubricator last |
Where the Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC300C15MC1WK Is Used
CNC machining center air supply
Filtering, regulating and lubricating the shop air that feeds the clamping cylinders and tool changer on a CNC machining center, with the check valve holding the set pressure if the main line dips.
Packaging line cylinders
Keeping the pneumatic cylinders on a carton-forming and sealing line supplied with clean, oiled air held at one stable setting through the whole shift.
Automotive assembly air tools
Feeding impact wrenches and nutrunners at an assembly station with filtered, oil-mist lubricated air, so the tools receive consistent lubrication at the pressure the station is set to.
Is the Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC300C15MC1WK the Right Set?
In the G-series you step from size 200 to 600 as port size and required flow grow; the 300 size with 1/2 in PT threads is aimed at medium machine supply lines. Drain type is a real choice: this code carries a manual drain, whose regulator allows a 0.05-0.9 MPa (7-130 psi) setting, while automatic-drain and differential-pressure variants exist in the series. The 5 um element gives finer protection than the standard 40 um. The gauge here is the round external type in MPa; square-gauge versions and psi or bar scales are also catalogue options. Thread is PT as standard, with G (BSPP) and NPT orderable, and bracket mounting is optional. Because flow is published as curves, not a single rating, ask us to confirm sizing against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (See datasheet here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Two-unit (GFC) or three-unit (GC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter regulator first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the set above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR300-C1 filter regulator on its own.
Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC300C15MC1WK FAQ
AirTAC publishes flow for the GFC series as performance curves rather than one rated figure, so we do not quote a single number here. Tell us your line pressure and demand and we will confirm the datasheet flow figures for this exact model on request.
The manual drain means accumulated moisture is released by opening the drain fitting, and the manual-drain regulator allows a 0.05-0.9 MPa (7-130 psi) setting; automatic-drain variants are available in the series if you prefer. The K in the code means a reverse (check) valve is fitted, which prevents backflow through the unit.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC300C15MC1WK
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.